Search for any green Service

Find green products from around the world in one place

Windcatcher the Huge Wooden Wind Generator

Windcatcher the Huge Wooden Wind Generator

Engineers have designed a new type of gigantic wooden wind generator dubbed the “Windcatcher” that could rise higher than the Eiffel Tower to tap into more powerful winds and generate huge amounts of renewable electricity far offshore.

At 1,066 feet (325 meters) from anchoring base to propeller tip, the proposed Windcatcher wooden wind generator system would surpass the iconic Parisian landmark’s height of 1,063 feet when fully built. But rather than offering tours of city views, this would allow the colossal tower to leverage faster wind speeds at higher altitudes than conventional wind turbines mounted closer to shore. Architects envision groups of these wooden wind generator megastructures with spinning wind turbines dotted along their central shafts, powering entire regions with clean energy.

Winds Tend to Blow Stronger Higher Up

Wind flow is enhanced the higher you go because ground obstacles like hills and buildings cause slowing friction. By elevating up into less disrupted airflow, the Windcatcher’s turbines could rotate 50% faster than ones constructed only 300 feet up. More spin velocity means manyfold more power generation. Modeling shows electricity output from a single Windcatcher could equal several traditional wind towers running in parallel. This boosted productivity per tower could make building fewer giants more efficient than patching seascape views with ever more waves of smaller mills.

Engineering a Gigantic Wooden Wind Generator

However, efficiently scaling turbines to Eiffel defining heights poses profound infrastructure challenges around stability, longevity, and safe maintenance access throughout the multiyear operation. The proposed Windcatcher design incorporates a sturdy yet flexible solid timber tower base tapering into an open skeletal wood frame swirling up to its peak generation capacity. The entire structure can gently sway to dampen extreme gust loads without catastrophic failure risk. Metal vibration dampeners also help absorb wind energy to limit motion.

Ringing the tower’s exterior, helical rampways, and grated platforms circle up to turbine machinery requiring routine inspection or emergency repairs. Cargo lifts and even tilting gondolas mean specialized crews can access any point from base to pinnacle in most conditions while remaining secure. But whatsoever precautions, embarking 1,000 feet into the North Sea gusts to bolt down wayward equipment is no task for the faint of heart.

The wooden wind generator concept has grabbed attention across renewable energy circles, yet experts debate feasibility obstacles around truly enormous timber joinery, massive construction logistics, operating equipment endurance, and connection infrastructure. Building numerous near Eiffel-topping wooden wind generators certainly nudges current offshore wind realism boundaries. However, proponents argue that visionary, clean power goals require expansive thinking, including wooden wind generators. However, intimidating initial steps appear. Our energy appetites will only expand, and every field bears longshot innovations that will later prove pivotal.

The proposal’s futuristic allure is clear. Windcatcher wooden wind generators evoke images of natural organisms gently swaying amid the waves, smoothly converting the wind’s energy into electricity, helping human life flourish onshore. Their sheer epic scale captivates the imagination much akin to Parisian Gustave Eiffel’s original wrought iron icon that long-held records as the world’s tallest manmade structure. Perhaps someday, rows of these block-long towers may claim their own position as ultimate wind energy titans built to sustainably power nations using renewable materials and ingenuity.

 

 


 

 

Source  Happy Eco News

How manufacturers can transition to 100% renewable electricity

How manufacturers can transition to 100% renewable electricity

Manufacturing and other industrial users account for around a third of the world’s energy consumption, according to the International Energy Agency(1). Electricity is a central element of that. If all the power consumed by factories and industrial plants came from renewable sources, it would make a sizeable contribution to tackling climate change.

It is a tough target, but one that companies are increasingly signing up to. The RE100 initiative, for example, has seen more than 400 corporations commit to 100% renewable electricity use across their operations. How they reach that goal will depend on many factors, including what they are making and where.

 

Switching to renewable electricity

“Organisations with lighter electricity needs and stable finances will be best positioned to transition to renewables. Companies with high electricity demand, like furnaces for glass, smelting or other large-scale heating applications and companies with very large footprints – such as expansive warehouses and assembly operations – may have more difficulty,” says Paul Holdredge, Director for Industrials and Transport at consultancy Business for Social Responsibility (BSR).

COP28 president-designate Dr Sultan Al-Jaber told the Adipec conference in Abu Dhabi in early October(2) that heavy industries may be hard to decarbonise but added “We know that solutions exist, and all industries can and must respond.”

The prospect of switching to renewable electricity has become far easier due to recent dramatic cost reductions. According to the International Renewable Energy Agency (IRENA), the price of solar photovoltaic power in 2010 was typically 710% higher than the cheapest fossil fuel, but by 2022 it was 29% cheaper(3). Currently electricity accounts for around 20% of final energy use in manufacturing, according to the International Renewable Energy Agency, and this is only expected to increase.

 

The manufacturing challenge

But it is not just the price of renewable energy, low as it is, that dictates a manufacturer’s ability to move to 100% renewable energy. Both the required initial capital investment and first-mover disadvantage—where it costs pioneers more than those that follow them to deploy new technologies—can significantly slow down a fully renewable transition. Not to mention the lack of availability of certain renewables in certain geographies and the fact that the appropriate infrastructure must be in place for this energy to be delivered—something no one company can do on its own.

Manufacturing requires an enormous amount of electricity in comparison to offices. In some countries or regions where the supply of renewable electricity is limited, like Japan, Taiwan, and Singapore, it is much more expensive than electricity produced by traditional means, placing a significant future cost burden on companies that purchase renewable electricity.

Epson is working to popularize the use of renewable electricity, despite the certainty of short-term cost increases. The company is advancing investment in sustainability to enrich communities and invest in future generations to create social value.

 

Going local

Wherever they are in the world, with whatever types of renewable energy available to them, companies need to adapt to local, national, and global circumstances. Seiko Epson, based in Japan, has done just that. Having switched to 100% renewable electricity for all its sites in Japan in 2021, it will complete the transition to 100% renewable electricity globally by the end of 2023(4). This goal has been made achievable through steady implementation of decarbonization targets and the use of renewable electricity since 2018.

In Nagano Prefecture, Japan, for example, where water sources are abundant, it relies on hydroelectric power. But in the Tohoku area, where it has a semiconductor fabrication plant, it uses hydropower and geothermal heat from the Ou mountains.

It is taking a similar approach outside Japan. In the Philippines, it taps into local geothermal and hydroelectric sources. While in Indonesia, it uses yet another renewable source—biomass power.

“We have used locally produced energy wherever possible,” says Junichi Watanabe, Managing Executive Officer General Administrative Manager, Production Planning Division, whose role encompasses the promotion of Epson’s procurement strategies in the supply chain, including the use of renewable electricity. “Rather than using energy generated in faraway countries, using a particular region’s abundant renewable resources brings many benefits, such as improving energy self-sufficiency and creating jobs.”

In addition to purchasing renewable electricity, Epson co-creates and develops other power sources through continuous renewable electricity purchases. In partnership with Nagano Prefecture and Chubu Electric Power Miraiz Company, Inc., the company began support of hydroelectric power plants in Nagano Prefecture. Two are already in operation (totalling 5,770 kilowatts) and another is scheduled to begin operation in 2024. That number is expected to increase to five by 2025.

Such targets can help a company stand out from the crowd. “Based on our research, setting a near-term goal for 100% renewable electricity use is an example of leadership and a differentiator. Some companies also have roadmaps to transition over longer time periods,” says Holdredge.

 

Among the practical methods companies should consider are:

• Sourcing renewable electricity from local suppliers via contracts with electricity suppliers – the ability to do this will depend on the rules in a particular country but, if it is possible, a company can be confident its electricity is only coming from renewable sources.

• Generating electricity on-site, via rooftop solar panels or, if space allows, wind turbines. Even if they do not generate all the power needed, they can still make a useful contribution.

• Develop battery storage facilities. A common concern about renewable electricity is the risk of supply being interrupted when the wind isn’t blowing or the sun isn’t shining, but storage technology offers a viable way to address that.

 

When it comes to solar power generation systems, Epson’s sites also decide whether to adopt self-investment or power purchase agreement (PPA) based on the individual circumstances of each country or region. The solution will vary from company to company. But most manufacturers are likely to find a combination of these elements will go a long way to reaching their renewable electricity goals.

What’s more, many manufacturers like Epson realize that their indirect GHG emissions from their entire value chain (Scope 3) are much greater than the GHG emissions from their own electricity use (Scope 2). As such, by reducing the sector’s Scope 2 emissions using renewable energy—something the sector can do independently—is likely to have a far greater impact on society. Setting goals early and demonstrating a company’s stance toward solving climate change is the key to co-prosperity with suppliers and a sustainable society.

“For large companies the return on investment is there to make the case for investment in renewables. For smaller companies this can also be true, but it depends on the geography. Government incentives can only speed up transition which is sorely needed,” says Christy Slay, Chief Executive Officer of The Sustainability Consortium.

 

The future for greener manufacturing

There are big gains for humanity if climate change can be addressed, but for manufacturing companies and their shareholders the best approach could also deliver commercial gains.

Consumers and investors are increasingly likely to reward companies with greener credentials, making it an essential part of long-term market positioning. In addition, greater use of renewables and greater self-generation can make a company more resilient to volatile electricity prices on the open market.

“Reaching 100% renewable is tough but pushing to get as close as possible, as soon as possible should be every company’s focus right now,” says Slay. “Epson has managed to stay one step ahead of the industry and is setting an example not only to Japan but to the world.”

 

 


 

 

Source  Reuters

New York State’s Largest Rooftop Solar Installation Ever

New York State’s Largest Rooftop Solar Installation Ever

New York State has taken a big renewable step forward with its largest rooftop solar installation yet. Recently, the state unveiled its largest rooftop solar project stationed atop the Medline Industries distribution center. This landmark achievement not only fortifies New York’s commitment to green energy but also serves as a beacon for other states to follow.

Tucked away at the expansive Medline Industries distribution center, this massive project is a testament to clean energy’s tangible benefits. With the capability to power an impressive 1,600 homes annually, the project is undeniably significant; it is the largest rooftop solar installation in New York state. This initiative boasts a production capacity of 7.2 megawatts to break down the numbers derived from its 17,000 solar panels.

Furthermore, the environmental implications of this largest rooftop solar installation project are profound. New York State expects to reduce its annual carbon footprint by 6,000 metric tons by harnessing the sun’s energy. To contextualize this, it’s akin to removing several thousand cars from the roads each year, paving the way for cleaner air and a healthier environment.

While individual projects like the one at Medline Industries are pivotal, they form part of a much grander scheme in New York’s green energy blueprint. Under the New York Climate Act Goal, the state has set its sights on an ambitious target: generating 6 gigawatts of solar energy by 2025. The largest rooftop solar installation in NY goes beyond just energy production—it’s about redefining the state’s relationship with power consumption and making clean energy an accessible commodity for all.

No significant venture comes to fruition without solid financial backing, especially the state’s largest rooftop solar installation. With its $8 million price tag, the Medline project required considerable investment. PowerFlex, a renowned entity in the clean energy domain, took the lead with a hefty $5 million investment. Their faith in the project’s potential was echoed by the New York State Energy Research and Development Authority, which further infused $3 million through its NY-Sun initiative. Such investments underscore the belief that sustainable projects are ecologically beneficial and economically viable.

Solar energy, while beneficial, remains elusive to many due to the upfront costs associated with panel installation and maintenance. This is where community solar projects step in as game-changers. These initiatives eliminate the need for individual households to install their own panels. Instead, they allow consumers to benefit from solar power by tapping into a shared grid, which receives energy from community-based solar installations.

By integrating solar power into the local grid, residents, irrespective of their housing situations or financial standings, can access clean energy. This communal approach democratizes solar energy access and fosters a sense of community collaboration towards a sustainable future.

New York’s endeavors in solar energy have solidified its reputation as a frontrunner in the U.S. community solar market. The statistics are telling: since 2012, the state has witnessed an astonishing 3,000% surge in solar access. Beyond the environmental accolades, this growth trajectory has ushered in economic prosperity. Over 13,400 individuals now find employment in the solar sector in New York. Additionally, as technologies and methodologies have improved, there’s been a notable 72% decrease in costs associated with solar energy, making it even more accessible.

The unveiling of Medline Industries’ largest rooftop solar installation is not merely a testament to New York State’s green ambitions; it’s a clarion call for other regions to intensify their renewable energy pursuits. As New York strengthens its renewable energy portfolio, its strategies and successes offer valuable insights for broader national and global adoption.

For stakeholders, investors, and the general public, there’s never been a more opportune time to delve deeper into the realm of solar energy. By understanding its intricacies and potential, one can contribute to and immensely benefit from the burgeoning solar sector.

 

 


 

 

Source   Happy Eco News

Cement Energy Storage – Two Ways

Cement Energy Storage – Two Ways

Cement, the binding agent in concrete, is the world’s most widely utilized construction material and may soon be used as cement energy storage. However, emerging research reveals its overlooked potential to serve as a cement energy storage medium in two completely different ways: solid thermal batteries and supercapacitors (when combined with carbon).

Cement Blocks as Thermal Batteries

According to an article in the Journal of Composites Science, scientists have developed a method to produce cement-based blocks that effectively function as thermal batteries. Their technique infuses cement blocks with the ability to soak up renewable electricity when manufactured and then discharge it later on demand as usable heat.

The researchers use chemical alterations during the concrete mixing process to integrate phase change materials into the cement binder matrix. These phase-change materials have the ability to store and release thermal energy.

The resulting cement energy storage blocks contain phase change materials that can absorb electricity when it is most abundant and inexpensive from the grid or renewable sources. The charged blocks can then act as solid thermal batteries, releasing their stored energy as heat when needed for space and water heating systems.

In initial tests, the team achieved energy densities comparable to lithium-ion batteries in their cement energy storage-based blocks. This stored energy is emitted as gentle heat when water is added, with adjustable discharge rates. The blocks can offer long-duration energy storage across daily cycles or entire seasons.

By incorporating waste materials like plastic ash during production, the researchers achieved lower costs than conventional concrete blocks or batteries. Additional waste heat captured during block fabrication can provide self-generated power.

The creators say that scale adoption of such cement energy storage thermal batteries could provide renewable energy storage for buildings while lowering grid demand peaks. The cement blocks offer an alternative to mining metals like lithium, cobalt, and nickel, which are finite and environmentally destructive to extract.

This novel approach redirects one of cement’s existing useful properties – its high thermal mass – towards storing renewable energy rather than fossil fuels traditionally used for heat in cement kilns. It points to one-way cement could aid sustainable energy transitions through material innovation.

 

Conductive Cement-Carbon Composites

Researchers at MIT have also demonstrated cement energy storage’s potential as an energy storage medium by transforming it into a highly efficient supercapacitor. Their method infuses cement with carbon-based additives to create cement-derived composites with enhanced conductive properties.

The MIT team found that the resulting material attained supercapacitor-like behaviors by mixing cement with inexpensive carbon black additives. This was due to carbon black creating a conductive surface area network throughout the composite.

With just 3% carbon black content by volume, cement’s conductivity spiked to levels comparable to powerful supercapacitors. The team states that a cement block around 45 cubic meters in size could potentially store up to 10 kilowatt-hours of energy – equal to an average home’s daily usage.

While still experimental, the researchers say these carbon-infused cement energy storage composites could enable integrated energy storage in concrete structures. Walls, foundations, or roadways made with such cement mixtures might capture solar, wind, or waste energy onsite for later usage.

The carbon provides the charge-storing capacity, while ubiquitous cement allows for scalable, inexpensive production since these composites do not rely on scarce materials like lithium or cobalt. Combined, they offer unique advantages as sustainable energy storage solutions.

 

Conclusion

Together, these two emerging techniques demonstrate that one of the planet’s most abundant building materials – cement – can potentially provide flexible, large-scale energy storage as demands grow.

While still in the early stages, both research trajectories showcase cement’s latent abilities to store energy through novel manufacturing processes and composite ingredients. With further advancement, cement energy storaget-based batteries and supercapacitors may offer new tools for enabling greater renewable energy integration across infrastructure. The present global ubiquity of concrete construction means cement-derived energy storage could be rapidly deployable once perfected. Unlocking the hidden attributes of cement through materials science and engineering may yield key innovations to support grids in an electrified, renewable future.

 

 


 

 

Source   Happy Eco News

Renewable energy battery systems could harness eggshell proteins for electricity conduction

Renewable energy battery systems could harness eggshell proteins for electricity conduction

Chicken eggshells may be the answer to developing safer, sustainable and cost-effective rechargeable battery storage systems, according to new research.

Murdoch University Associate Professor Dr. Manickam Minakshi Sundaram, from the Center for Water, Energy and Waste at Harry Butler Institute, for a doctoral thesis has successfully developed a new mechanism associated with electrode materials and electrolytes, offering an alternative to the expensive and impractical power storage technologies of the past and present.

“We’ve found that chicken eggshells can be used as electrodes—a conductor of electricity—in powering batteries. Eggshells contain a high level of calcium carbonate, and when they are baked and crushed, their chemical compositions change and they become a more efficient electrode and conductor of power,” Dr. Minakshi said.

“The current lithium-ion batteries used for renewable energy storage typically use fossil fuels.

“Repurposing a bio-waste product like eggshells could add considerable value to the renewable energy market. They also offer a potentially safer option, as the current lithium battery technologies are high-cost and potentially unsafe in the event of catastrophic failure.”

As the world continues to prioritize renewable energy sources, this breakthrough marks a significant step forward, offering hope for a greener and more sustainable future.

The study, conducted by Dr. Minakshi as part of his higher doctorate thesis with Flinders University, focused on the development of sustainable electrodes in aqueous-based energy storage technology.

“The implications of this study go beyond scientific discovery,” Dr. Minakshi said.

“Chicken eggs and related products are used in large quantities in the food processing and manufacturing sectors, households, the nutrition industry and even in the pharmaceutical industry, but their shells are typically sent as solid waste to landfill.

“However, eggshell and shell membranes contain a range of active chemical compounds that can be used. The reversibility of this new approach allows for efficient energy storage and retrieval. The study demonstrates that highly conductive aqueous lithium and sodium electrolytes with varying salt concentrations have the potential to replace existing non-rechargeable primary batteries. The discovery holds the promise of high energy capacity, long cycle life and affordability in aqueous batteries.”

By incorporating suitable additives such as biodegradable redox polymers, titanium boride/sulfide (TiB2, TiS2), or bismuth oxide (Bi2O3) compounds, the electrodes can be further modified to improve their performance.

“The potential applications of this breakthrough are immense,” Dr. Minakshi said. “We could transition from a linear economy to a circular economy, reducing, reusing and recycling waste improving both sustainable development and addressing waste management.”

The studies on sustainable electrode materials have also been extended to other biowaste including chitosan derived from crustaceans, mango seed husk, and grape marc from wineries. From these biowastes, N-doped carbon was derived, which exhibits excellent electrochemical performance.

 

 

 


 

 

 

Source –  Tech Xplore

Phosphazene-based electrolytes for high-voltage lithium batteries that work in extreme environments

Phosphazene-based electrolytes for high-voltage lithium batteries that work in extreme environments

Lithium metal batteries have numerous notable advantages over other existing battery systems, including high energy density. Nonetheless, the use of most existing high-energy lithium metal batteries in extreme environments is typically deemed unsafe or unfeasible, due to the volatility and flammability of their electrolytes.

Researchers at Bar-Ila University, University of Technology Sydney, CIC energiGUNE, and Tsinghua University recently set out to develop new electrolytes that could support the safe and stable operation of lithium metal batteries in a broader range of environmental conditions. These electrolytes, introduced in Nature Energy, were synthesized by using the fireproof phosphazene-derivative polymeric matrices.

“Replacing the graphitic anodes with metallic Li is considered a viable path to further increase the energy density of Lithium batteries,” Professor Doron Aurbach, one of the researchers who carried out the study, told Tech Xplore.

“However, the growth of dendrites on Li anode during cycling triggers catastrophic safety hazards, which severely hinders their practical applications. To solve this issue, ether-based electrolytes have been widely employed in Li metal batteries because of their relatively low reactivity with Li metal.”

Ether-based electrolyte solutions have a low viscosity and high ionic conductivity. These favorable properties can facilitate the rapid conduction of Li-ions and the exchange of interfacial charges in lithium batteries.

Ether-based electrolytes are also highly compatible with Li metal anodes, thus they can suppress the growth of dendrites while batteries are charging. Despite these advantages, many ether solvents are highly flammable, thus their use can greatly reduce the safety of battery cells.

“The low boiling points of ethers pose safety risks including fire, explosion, and liquid leakage,” Doron said. “Besides, the insufficient oxidation stability of ether-based electrolytes may lead to uncontrollable solvent decomposition on the cathode surface at high voltage (>4 V vs. Li/Li+), greatly deteriorating the cyclability of high-voltage Li metal batteries.”

In recent years, some research teams also introduced localized high-concentration electrolytes, which limit free solvent molecules in Li+ solvation structures. While these alternative electrolytes can reduce the time it takes to extinguish any fires that might arise, they do not fully eliminate the risk of fires or leakages.

“Polyphosphazene flame retardants with excellent flame-retardant effects have been widely used in the field of polymer flame retardants,” Doron said. “Combined with localized high-concentration electrolytes, the hybrids of polyphosphazene can effectively improve the flame-retardant effect with low addition contents. And the safety of the full cells can be largely promoted.”

In their recent paper, Professor Guoxiu Wang and their colleagues introduced a new versatile strategy to optimize ether-based electrolytes, preventing them from catching fire or leaking while also improving their compatibility with electrodes. This strategy entails a co-solvent and gelation treatment using butenoxycyclotriphosphazene (BCPN) monomers.

“To solve the inherent disadvantages of flammability and poor oxidation stability for ether-based electrolyte, fluoromethyl 1,1,1,3,3,3-hexafluoroisopropyl ether (SFE) was introduced as a co-solvent (served as an anti-solvent) with an ether solvent to improve the oxidation resistance and cathodes’ stability,” Wang said. “Then, these binary electrolytes were gelled in situ by polymerization of BCPN monomers to achieve flame retardancy and interfacial compatibility.”

In initial tests, Wang and his collaborator Dr. Dong Zhou found that their proposed treatment using fluorinated co-solvent and fireproof polymetric matrices fully eliminated risks of fire and electrolyte leakage in lithium metal batteries. The team were also able to achieve electrolytes that are highly compatible with high-energy cathodes using a carefully designed Li+ solvation sheath, along with the BCPN-derived protective surface films formed on the cathodes.

“We manufactured high-energy-density Li||NCM811 batteries using our gel electrolyte and these batteries achieved high-capacity retention, superior low-temperature performance, good cyclability under high pressure and steady power supply under abusive conditions,” Dr. Dong Zhou said. “We successfully solved the safety problem for high-energy lithium metal batteries.”

The recent work by this team of researchers could have important implications for the development of next-generation lithium batteries. The electrolytes introduced in Nature Energy and their underpinning design strategy could soon open a new path for fabricating high energy, durable and safely rechargeable Li metal batteries that can operate in extreme environments.

“In our next studies, we intend to continue our research on improving battery safety and low temperature performance, which would help to expand the extreme environment application of high energy density batteries, for instance allowing their integration in aerospace vehicles, submarines and polar region devices,” Wang added.

 

 


 

 

Source  Tech Xplore

GAC and Toyota develop ammonia engine for 90% CO2 reduction

GAC and Toyota develop ammonia engine for 90% CO2 reduction

Chinese state-owned manufacturer GAC has revealed a prototype engine that burns liquid ammonia, which could be an alternative fuel to electricity and hydrogen.

Developed in partnership with Toyota, the new-age ICE takes its inspiration from the maritime and haulage industries, which are exploring ammonia as an alternative to diesel for container ships and trucks.

Although not the first engine to be developed to run on ammonia, this is the first to be proposed for possible use in a passenger car.

At an annual technology presentation, GAC said it had overcome several issues, such as excess nitrogen emissions and an increase in combustion pressure compared with petrol engines.

“We’ve overcome the pain point of ammonia being difficult to burn quickly and put the fuel to use in the passenger car industry,” said Qi Hongzhong, an engineer at the GAC R&D centre in Guangzhou, China.

“Its value to society and for commercial uses are worth anticipating.”

Ammonia is a highly toxic substance used primarily as a fertiliser, but its combustible nature has brought it under the spotlight for future transport needs.

It possesses around half of the energy density of petrol, at 3.6kWh per litre, but emits no carbon, hydrocarbon or CO2 when combusted.

The traditional production method for ammonia is considered energy-intensive, but recent developments have led to small-scale production of ‘green’ ammonia, which uses renewable energy sources for carbon-free output.

More than two-thirds of the world’s annual production of ammonia is used in agriculture as fertiliser. It’s also used as a refrigerant gas and in the manufacturing of plastics, textiles, explosives and pesticides.

 

 


 

 

Source  Autocar

 

Baking Bread in a Solar Oven

Baking Bread in a Solar Oven

Since 2019, Lebennon has been facing an economic crisis. Following decades of corrupt government financial mismanagement, banks started to impose restrictions on withdrawals. They stopped giving short-term loans to businesses and no longer provided them with US dollars for imports. As a result, this reduced the country’s ability to pay for imports, including essentials such as wheat and oil.

Moreover, many of Lebannon’s bakeries rely on expensive diesel generators for electricity because the ongoing economic crisis has devastated its power grid. In 2021, the country’s two main power plants ran out of fuel and shut down. Most households only receive about one hour of electricity per day, and the cost of food increased by 350 percent in April 2023. Many people in the country cannot even afford basic foods like bread. In some cases, the cost of a loaf has increased seven times in the space of a month.

To help feed the country’s population, an inventor, Toufic Hamdan, created a commercial bakery to bake bread in solar ovens. The startup “Partners With Sun” has installed a solar convection oven on the bakery’s roof. The Solar Oven uses large silver mirrors to capture and magnify the sun’s rays to build heat.

The heat is transported by a transfer fluid which is then used to help operate a convection oven, allowing it to reach a baking temperature of between 300 and 400 Celsius. The heat is used directly in food and beverage production. They have successfully made milk loaf, French bread and anything that can be cooked at this temperature. The Solar Oven is designed for industrial use in the baking industry.

The Solar Oven is able to cut up to 80% of the bakery’s fuel bill and improve its production efficiency. As a result, it also reduces the amount of diesel the country would have to import. As a result, it will reduce the price of the bread bundle that reaches the customer. Moreover, each bakery would save at least around 10 tonnes of diesel a month. By 2030, Toufic hopes to completely eliminate the use of diesel ovens in bakeries and rely only on solar ovens.

Lebanon is also increasing the use of solar energy for individuals and businesses. The country went from generating zero solar power in 2010 to having 90 megawatts of solar capacity in 2020. An additional 100 megawatts were added in 2021 and 500 megawatts in 2022. This is a sustainable way for people to move away from diesel and has become a stand-in for both grid-supplied electricity and private diesel generators.

Although the switch towards relying on solar power in Lebanon is now a response to the economic crisis than a reaction to climate change and air pollution, it is an inspiring way to show how we can use the earth’s resources to help our societies in times of crisis. The country now has a target to source 30% of its electricity from renewables by 2030. This switch will help provide electricity and food at reduced costs to the people of Lebanon during this economic crisis.

 

 


 

 

Source  Happy Eco News 

Vortex Bladeless Turbine Wind Generator

Vortex Bladeless Turbine Wind Generator

How the Vortex Bladeless Turbine Works

The Vortex Bladeless Turbine is a pole-shaped structure that functions without rotating blades, but instead of rotating blades, it works off vibrations generated in the structure by vortices created when the wind passes around it. When the frequency of the vortices matches the resonance frequency of the structure, into which an alternator is integrated, the vibration energy can be transformed into electricity. In simpler terms, as the wind flows past the turbine, it creates a series of spinning whirlwinds, or vortices, that cause the rod-shaped turbine to vibrate. This vibration then converts the mechanical energy into electrical energy that can be used as a source of power.

One of the main differences between bladeless or motionless turbines and traditional wind turbines is that they can generate power at low wind speeds, which is significant because wind speeds in urban areas are typically lower than in rural areas. Traditional turbines require higher wind speeds, making them less effective in built-up areas.

Advantages of the Vortex Bladeless Turbine

One of the significant benefits of the Vortex Bladeless Turbine is that it’s more cost-effective than traditional turbines. It has fewer moving parts, which results in reduced manufacturing and maintenance costs. Also, it doesn’t require any oil or lubricants, making it a more environmentally friendly option.

The design of the Vortex Bladeless Turbine is more eco-friendly than traditional turbines because its pole-shaped structure does not pose any harm to birds and other animals that can come into contact with rotating blades. Furthermore, the device’s sleek design takes up less space than traditional wind turbines, making it adaptable to a wide range of environments.

Another benefit of the Vortex Bladeless Turbine is its flexibility. Its small size makes it the perfect choice for urban areas, where space is limited. They can be placed on the roofs of buildings or integrated into street furniture, providing an unobtrusive source of renewable energy. It can also be used to power individual homes or small communities that are off-grid, where running costs are a concern.

Applications of the Vortex Bladeless Turbine

One application of the Vortex Turbine is in urban environments. As mentioned earlier, these turbines can generate electricity at low wind speeds, making them a viable option for powering cities and towns. By placing them in strategic locations, they can capture the wind currents that flow through narrow streets, parks, and plazas.

Another application of the Vortex Bladeless Turbine is its potential to replace traditional turbines in remote locations. Traditional turbines are often used to provide power in areas where a connection to the electrical grid is not possible. However, their high manufacturing and maintenance costs make them less feasible in such instances. The Vortex Bladeless Turbine, being cost-effective and low maintenance, provides an alternative that can meet the power needs of those living in isolated areas.

The Vortex Bladeless Turbine is a revolutionary wind power generator that has the potential to transform the way we generate renewable energy. Its low manufacturing and maintenance costs, eco-friendly design, and flexibility make it an attractive option for powering urban areas and remote places alike. While there are some limitations, such as the amount of power generated compared to traditional turbines, and the need for further development to increase efficiency, the Vortex Bladeless Turbine is a step in the right direction towards a cleaner, more sustainable future. The device’s minimal environmental impact also makes it an excellent choice for environmentally conscious consumers and energy companies alike.

With renewable energy becoming more important in the fight against climate change, the development of innovative technologies like the Vortex Bladeless Turbine is crucial. As we continue to explore cleaner, more sustainable sources of energy, devices like these will become increasingly critical. And while there are still challenges to overcome and further research to be done, the potential benefits of the Vortex Bladeless Turbine make it a promising addition to our renewable energy toolkit.

Overall, the Vortex Bladeless Turbine is a fascinating innovation that could play a significant role in the future of wind power generation. Its eco-friendly design, low cost, and flexibility make it an exciting alternative to traditional wind turbines. It’s clear that as we move towards a more sustainable future, technologies like this will continue to be developed, offering us new and exciting ways to generate renewable energy and help protect our planet.

 

 


 

 

Source Happy Eco News 

 

Centrica plans battery storage, solar and hydrogen at former gas power plant

Centrica plans battery storage, solar and hydrogen at former gas power plant

British Gas owner Centrica has today (24 January) confirmed that it has acquired the four-acre site for the former Knapton Generating Station, near Malton in North Yorkshire, from Third Energy.

Gas-fired power generation ceased at Knapton in late 2019, as Third Energy had fired the plant using fracked gas before the UK Government imposed a moratorium on fracking. Third Energy was initially planning to create a low-carbon ‘energy park’ at the site but Centrica, as new owner, is now taking up that mantle.

Centrica has proposed the creation of a 28MW battery energy storage facility on the site. The facility will be developed in stages and the first part will be a 56MWh grid-connected battery. Centrica claims that this battery would be able to power 14,000 homes for two hours.

Centrica has also confirmed that it will explore the potential for installing solar panels in the surrounding area. A co-located battery with renewables like solar can help overcome the challenge of intermittent generation, storing generated electricity when conditions are favorable and demand is low, then providing the electricity to the grid during times of low generation and high demand.

Additionally, Centrica will investigate whether Knapton would be a suitable location for off-grid hydrogen production.

 

SSE Renewables

In related news, SSE Renewables has opened a public consultation on plans to co-locate battery energy storage and solar panels with its existing Richfield Wind Farm at Bridgetown in County Wexford, Ireland.

Richfield (pictured) is an 18-turbine wind farm that has been operational since 2006. It has a total generation capacity of 27MW.

 

 

SSE Renewables is seeking to develop a 21MWp solar farm on lands near the wind farm. It also wants to develop a co-located 10MW battery energy storage system which, like Centrica’s, would be able to power thousands of local homes for two hours.

The proposed solar farm would be located in the townlands of Hooks and Yoletown while the proposed battery energy storage system would be co-located adjacent to the existing substation at Richfield Wind Farm. SSE Renewables intends to submit a planning application to the County Council this spring, following a full public consultation.

SSE Renewables will need to, also, apply for permission for grid connection. At present, Ireland does not permit grid connections for ‘hybrid’ technologies, where projects are co-located.

“While some regulatory hurdles still need to be overcome to allow for hybrid grid connections, we’re ready at SSE Renewables to work closely with key government and regulatory stakeholders so that we can remove any remaining barriers and support the delivery of important solar and battery technology projects co-located at wind farm sites,” said the business’s onshore renewables development and construction director Heather Donald.

Ireland is notably aiming to generate 80% of its electricity from renewable sources by 2030, Wind is currently the leading renewable generation method for Ireland.

 

 


 

 

Source edie