Search for any green Service

Find green products from around the world in one place

How the World’s Whitest Paint Can Reduce Energy Use

How the World’s Whitest Paint Can Reduce Energy Use

Scientists have long understood the climate and energy efficiency benefits of reflective white paints. Now, engineers at Purdue University have created the world’s whitest paint that reflects more than 98% of sunlight, leaving all other paints appearing grey by comparison. As demand for sustainable solutions grows globally, this innovation promises greener buildings and cities by passively lowering carbon emissions and energy use.

The world’s whitest paint formulation was reportedly completed in early 2021. While initially produced for research applications at Purdue, press releases indicate Perdue intends to optimize and commercialize the product for widespread availability as early as late 2023. This rapid early adoption timeline speaks to the hunger for market-viable incremental gains in cooling efficiency as global temperatures continue rising.

With the formulas and methods published openly, it remains to be seen whether alternate whitest paint variants may emerge from other research teams or commercial producers, sparking a global race toward passive cooling innovation. Even moderate cooling boosts from white paint could incentivize entities like major cities to begin budgeting for wide-scale reflective surface projects within the decade.

Applying the world’s whitest paint to building rooftops and envelopes can reduce their surface temperatures by over 20°C compared to conventional options. By reflecting rather than absorbing heat, the broad deployment of the world’s whitest paint could mitigate the phenomenon of urban heat islands, where dense cityscapes absorb and radiate increased warmth. Modeling suggests summer city temperatures could decrease by over 2°C using this approach.

The development of a highly reflective and renewable calcium carbonate-based paint offers an innovative solution to excessive urban heating. As climate change brings more frequent and intense heat waves, the cooling potential of reflective white surfaces will grow increasingly impactful. Deploying this paint across a city’s building stock can lower indoor and outdoor temperatures while cutting air conditioning demands as well. Transitioning rooftops from heat-trapping dark colors to the whitest paint formula could become a climate resilience strategy for communities worldwide.

Looking beyond buildings, custom reflective paints and paving materials show similar potential for cooling everything from vehicles to sidewalks to transit shelters. An urban landscape covered with maximum heat reflection could compound cooling benefits compared to white rooftops alone. More research into expanding high-albedo surfaces across the built environment will further quantify the associated quality of life and emissions reductions. Simple shifts in surfaces and materials at scale could make future cities markedly more livable.

The world’s whitest paint keeps surfaces cool to the touch, even in the hottest environments. Compared to the air temperature at mid-afternoon, a surface painted with the world’s whitest paint can be several degrees cooler than regular white paint. At night, the difference is even more pronounced, up to 19 degrees.

The corresponding drop in air conditioning electricity demand is equally significant from an emissions reduction perspective. Studies by the US Environmental Protection Agency show cool roofs can reduce a building’s annual air conditioning requirements by 10-30%. The increased grid energy efficiency will provide critical flexibility for integrating renewable energy sources as part of essential decarbonization efforts across the power sector.

While the world’s whitest paint’s exceptional solar performance will justify further optimization before mass production, its imminent commercial arrival heralds a shift in leveraging incremental materials innovation. The compound benefits of collective small-scale action represent meaningful progress, offering pragmatic climate hope. If cool paint alone makes summers more bearable, our combined creative efforts focused first on the possibly more than the ideal may yet brighten prospects for sustainable living.

With vision and patience, Perdue’s ultra-white paint is but a glimpse of a future where green cities are dotted with communities that thrive in the hotter world they’ve warded off, one roof at a time.

 

 


 

 

Source  Happy Eco News

Sustainable Cooling: Electrocaloric Cooling Breakthrough

Sustainable Cooling: Electrocaloric Cooling Breakthrough

As heatwaves intensify across the globe, the demand for air conditioning and refrigeration skyrockets. The ballooning demand for cooling strains energy infrastructure and escalates emissions from vapor compression systems. These conventional refrigerators and AC units rely on greenhouse gases and inefficient mechanical compressors that have reached their efficiency limits. With little room for improvement, vapor compression technology cannot sustainably shoulder doubling cooling demands. Scientists urgently search for climate-friendly innovations before the warming world overheats.

In a breakthrough discovery, researchers at the Luxembourg Institute of Science and Technology (LIST) pioneer a radically different cooling approach harnessing the electrocaloric cooling effect. This phenomenon describes particular ceramic materials that heat up or cool down when electric fields flip on and off. By cleverly leveraging this conductivity toggle, the LIST team designed an assembly that can pump heat without noisy, energy-draining compressors.

Electrocaloric cooling is a fascinating phenomenon where certain materials experience a reversible temperature change when an electric field is applied. In simpler terms, you can directly use electricity to manipulate their temperature, creating a cooling effect. This opens up exciting possibilities for energy-efficient and environmentally friendly cooling technologies.

The regenerative system developed by LIST alternates layers of electrocaloric capacitors with liquid coolant. Switching an electric field pulls heat from the fluid into the capacitors, cooling the system. Cutting voltage then dissipates the heat, so the cycle repeats. The smooth back-and-forth between hot and cold replaces high-maintenance mechanical parts with solid-state reliability. Scientists calculate that electrocaloric cooling efficiency leapfrogs vapor compression refrigeration by directly shuffling heat instead of wasting effort compressing refrigerants.

Since fluids naturally stratify by temperature, no added energy input is required to cycle hot and cold. The passive electrocaloric cooling generator minimizes electricity demands by exploiting thermodynamics rather than fighting against them. With game-changing energy savings over traditional refrigerator designs, this electrocaloric cooling technology paves the way for truly sustainable cooling.

Seeking real-world integration, LIST researchers collaborate with manufacturing partners to develop prototypes. The original discovery featured a single electrocaloric part, which limited heat transfer speed. The current regenerator assembly overcame this by interleaving many capacitors with parallel coolant channels. This boosts heat pumping capacity for powerful, real-world performance. Ongoing enhancements also aim to lower costs and extend operating lifetimes to enable widespread commercialization.

While the immediate goal focuses on eco-friendly refrigeration, the applications likely won’t stop there. Any process generating unwanted heat could benefit from electrocaloric cooling technology. Air conditioners, electronics cooling, industrial processes and even solar energy storage represent prospective opportunities. Because electrocaloric cooling systems thrive when miniaturized, microchip-level cooling also offers possibilities for computing breakthroughs.

For example, electrocaloric cooling films could provide on-chip cooling for high-performance computer processors, enabling faster computing speeds. Electrocaloric cooling systems can also be used to condense water vapor in air conditioning and dehumidification applications. This could allow environmentally-friendly refrigerants like water instead of HFCs to be used in vapor compression HVAC.

Additionally, the flexibility of electric-powered cooling lends well to renewable energy integration and smart grid load balancing. Electrocaloric heat pumps powered by wind or solar electricity during times of excess generation could store thermal energy for later dispatch while synchronizing supply and demand on the grid. With materials and system configuration innovations, electrocaloric cooling technologies show promise for revolutionizing thermal management across many sectors.

Despite enormous promise, unanswered questions remain regarding large-scale manufacturing and durability. However, early indications suggest the regenerator’s simple solid-state design will prove reliable over long stretches. By dodging complex mechanical components, the approach naturally steers towards sustainability. Cooling demand will only climb higher as climate change continues, but creative solutions like the LIST electrocaloric cooling regenerator offer hope we can innovate our way to a cooler future.

 

 


 

 

Source  Happy Eco News 

Salt solution cools computers, boosts performance

Salt solution cools computers, boosts performance

Researchers at the City University of Hong Kong found the secret to a more efficient, less expensive approach to keeping massive computer systems cool: Just add salt.

A growing concern in computing is the enormous amount of heat generated in ever-increasing global computer arrays churning out more than 2 zettabytes per week.

Such gigantic processing capacity leaves an enormous carbon footprint. Commercial cloud providers utilize cooling systems requiring billions of gallons a year to maintain optimal temperatures.

According to the MIT Press Reader, cooling processes account for more than 40% of electricity usage. A single data center can consume the same amount of electricity as 50,000 homes.

“As a result, the cloud now has a greater carbon footprint than the airline industry,” anthropologist Steven Gonzalez Monserrate wrote in an MIT Press article last year.

Wei Wu, a professor in the School of Energy and Environment at the Hong Kong university, devised a system with several colleagues that improves upon current heat dissipation technology.

In a paper published Oct. 31 in the journal Device, Wu described a process in which water containing the salt lithium bromide relies on evaporation and reabsorption to keep temperatures low.

The process is “a passive thermal management strategy that relies on moisture desorption from hygroscopic salt solutions through a protective membrane that only allows water vapor to pass through,” Wu said.

The porous membrane is set in a structure that prevents any salty solution from contact with computer components. A heat sink directs accumulated heat away from sensitive electronics.

Wu, in his paper, “Membrane-encapsulated, moisture-desorptive passive cooling for high-performance, ultra-low-cost, and long-duration electronics thermal management,” said the device “can spontaneously and quickly recover its cooling capacity by absorbing water vapor from the air during off hours.” He compared the process to nature, where mammals regulate body temperature by sweating and rehydrating.

The high moisture absorption capacity and low cost of the lithium bromide-treated water offers a clear advantage over competing cooling strategies using hydrogels and metal-organic frameworks. Those systems require time-consuming regeneration rates and require active replenishment of water supplies.

“In contrast, hygroscopic inorganic salts, such as LiCl and LiBr, show promise in addressing these issues due to their extremely high moisture absorption capacity and low cost,” Wu said.

Applying the process to a single computer, the researchers measured an improvement of more than 32% in performance. They also said the process was completed “with a record-high cost effectiveness.”

“Poor thermal management can cause tremendous heat accumulation within electronic devices, resulting in the loss of functionality and, eventually, device failure,” Wu said. “We demonstrate that the proposed strategy is capable of offering a long-duration stable cooling capacity without solution leakage and corrosion, which can suppress the temperature rise of an emulated heater with a record-high cost effectiveness compared with state-of-the-art passive cooling strategies.”

The cooling strategy, Wu said, is cost effective and highly scalable, and “can be useful for various cooling applications with few technological barriers.”

 

 


 

 

Source  Tech Xplore

The Five Best Ways for Free Home Cooling with No AC

The Five Best Ways for Free Home Cooling with No AC

It’s hot these days. Here are the five common sense ways for home cooling with no AC.

  1. Close your curtains and blinds during the day. This will help to keep the sun’s heat out of your home. If you don’t have curtains or blinds, you can use sheets or towels to cover your windows. Close your curtains and blinds during the day.
  2. Run ceiling fans. Ceiling fans can help to circulate the air in your home, which can help to keep you cool. If you have a ceiling fan, ensure it is set to blow down.
  3. Use fans to create a cross breeze. If you have windows on opposite sides of your home, you can open them to create a cross breeze. This will help to draw the cooler air in from outside and push the hot air out.
  4. Take cool showers or baths. Taking a cool shower or bath can help to lower your body temperature. You can also use a wet towel to cool down your neck and forehead.
  5. Cook outside and unplug devices. Cooking outside on a barbeque, camp stove, RV, or other appliance outside will help keep your house cooler. The heat generated by an oven or a stove can quickly counteract any other efforts you made throughout the day.

Here are some additional tips to keep your home cool without air conditioning:

  • Ventilate your home at night. If it’s cooler outside than it is inside, open your windows at night to let in the cool air and begin the next day with a nice cool house.
  • Plant trees around your home. Trees can help to shade your home and keep it cooler in the summer.
  • Use reflective insulation. Reflective insulation can help to reflect the sun’s heat away from your home.
  • Seal up any air leaks. Air leaks can let in hot air, so sealing them up is important.

By following these tips, you can keep your home cool without air conditioning and save money on your energy bills.

 

 


 

 

Source  Happy Eco News

Aquifer Thermal Energy Storage for Renewables

Aquifer Thermal Energy Storage for Renewables

It’s Not All About Energy Generation

When the topic of decarbonization comes up, oftentimes, we think of transportation or energy generation. These issues are important, as vehicle emissions are a major problem, as well as emissions from fossil fuel power generation. However, while important, these issues only partially show the roadblocks to moving towards a green future.

Another component that needs to be addressed in the conversation is energy storage and efficiency in renewable energy.

Wind and solar energy are important and rapidly developing technologies but are dependent on weather conditions that vary from month to month and from year to year. In colder months, when houses need to heat, that is when significantly less sunlight is present, thus driving down the available energy to heat them.

This is why energy storage is crucial to the conversation regarding renewable energy, but other solutions might mitigate this problem if properly implemented. This is how aquifer thermal energy storage (ATES) could help assist in cooling and heating buildings, reducing the reliance on other renewable energy sources.

How About Aquifer Thermal Energy Storage?

Energy storage is a difficult topic to address, as the technologies required to implement large-scale grid energy storage require, ironically, a lot of energy. This isn’t helped by the fact that hydrogen energy storage systems right now lose a significant amount of the energy stored.

This is why reducing the grid energy demand is important to implement renewable energy systems successfully. Aquifer thermal energy storage is an interesting form of renewable energy specific to the heating and cooling of buildings because it ties in directly with the seasons that affect solar energy so much.

It works by utilizing two wells connected to the same groundwater reservoir. Cold groundwater is pumped up to cool the building during the summer, then stored. The same process happens in winter but in reverse. Warm groundwater is pumped up into the building, then stored.

Aquifer thermal energy storage systems can also store excess heat from industrial operations, similar to the geothermal systems being deployed in decommissioned oil wells. This process can help bridge the gap between the seasonal availability of renewable energy while at the same time decarbonizing the heating and cooling sector.

This system is also useful because it can make energy infrastructure more resilient by reducing the demand currently placed upon it by heating and cooling. According to a study in Science Direct, Aquifer thermal energy storage systems could reduce reliance on fossil fuels for energy by up to 40%.

New Tech can Help but not Solve Inherent Limits

The importance of renewable energy in the transition to a greener world cannot be understated. However, it is also important to recognize that there are limitations to the technology currently available.

Going forward, there are certainly ways that renewable energy, specifically solar, can become more efficient; the issue of seasonal availability will always be there. This is why alternative methods of addressing needs like heating and cooling are as important.

The issue of energy storage is also important because bridging the gap between availability and need is necessary for making renewable energy a viable alternative to our current fossil fuel energy generation system.

 

 

 


 

 

 

Source Happy Eco News

 

Could this colourful plant-based film replace the need for air conditioning?

Could this colourful plant-based film replace the need for air conditioning?

Scientists at Cambridge University in the UK are working on an eco-friendly alternative. Their invention consists of a plant-based film that stays cool when exposed to sunlight.

The material could someday be used to keep buildings and cars cool without the need for external power. Coming in a range of textures and bright iridescent colours, it’s aesthetically pleasing too.

How does the eco-friendly cooling film work?

For a material to stay cooler than the air around it during the daytime, there are two critical requirements. It must have high solar reflectance to reflect the warmth of the sun and not heat the air around it. It must also have a high emissivity in infrared bands to emit heat into outer space efficiently.

Only a few materials have these properties and scientists are already developing them into paints and films capable of what is known as ‘passive daytime radiative cooling’ (PDRC).

When applied to the surface of a car or building, it means that these materials create a cooling effect without consuming electricity or creating pollution.

How can PDRC materials be made more attractive?

Since they need to be solar reflective, PDRC materials are usually white or silver.

Adding colour would decrease their cooling performance. This is because coloured pigments selectively absorb specific wavelengths of light, only reflecting the colours we see. This extra light absorption creates a warming effect.

“These limited colours hinder the applications where visual appearance is a key consideration, such as for architecture, cars and clothes,” says project member, Dr Qingchen Shen.

To increase the desirability of these materials, colour is an important factor.

Along with the project’s lead investigator, Dr Silvia Vignolini, Dr Shen set out to research ways of achieving colour without the use of pigments.

They looked to structural colouration as a solution. This is where shapes and patterns reflect specific colours of light without the presence of pigmentation, as seen on soap bubbles and oil slicks.

Seeking a natural source of this phenomenon, the research team used cellulose nanocrystals (CNCs) – derived from the cellulose found in plants – to create iridescent, colourful films without any added pigment.

“We specifically use cellulose-based materials for our films because cellulose is the most abundant polymer in nature,” says Dr Shen.

It is also one of the few natural materials capable of promoting PDRC.

After experimenting with basic colours, the researchers are now working on glittery CNC-ethyl cellulose films. They are also developing different textures that could blend in with various wood finishes.

How effective is the colourful cooling film?

The researchers created layered cellulose films in vibrant blue, green and red colours and put them to the test.

When placed under sunlight, they were an average of nearly 4°C cooler than the surrounding air.

One square metre of the film generated over 120 watts of cooling power, rivalling many types of residential air conditioners.

As a general guideline, bedrooms require around 80 watts per square metre and living spaces 125 watts of air conditioning capacity.

The researchers hope to find new ways to leverage CNC-ethyl cellulose films. These include adding sensors to detect environmental pollutants or weather changes.

Ultimately, they hope the film coating could serve several purposes at once. It could be used to both cool buildings and to alert to changing levels of pollutants in congested areas, for example.

 

 


 

 

Source Euronews Green

New Solution For Cooling Solar Panels

New Solution For Cooling Solar Panels

new technique for cooling solar panels has been under development in Egypt. A mixture of water, aluminum oxide, and calcium chloride hexahydrate cools the PV modules from underneath.

This research, conducted in Cairo, builds on earlier research this spring that France’s Sunbooster was exploring. The technology found success and was able to cool down solar modules when their ambient temperature exceeded 25°C. Pipes spread a thin film of water onto the glass surface of the panels. The solution was implemented in rooftop solar PV systems and ground-mounted solar power plants. The technology enables an annual increase in power generation of between 8% and 12%.

Regarding the innovation in Egypt, researchers at Benha University applied various mixtures of their passive coolants to a 50 W polycrystalline PV panel. A cooling unit, DC pump, valves, water flow meter and connecting pipes provided a system with aluminum channels underneath the panels for the water and the Al2O3/PCM mixture. The panels were south adjusted and oriented 30 degrees from horizontal.

How It Works

The PCM mixture was heated to melting point to form a liquid and Al2O3 nanoparticles were added to it in the aluminum channels. “The dispersion of particles in the PCM liquid is done using an agitator bath with four different mass concentrations,” the group stated.

“Applying the cooling system, whether using water and/or [the] Al2O3/PCM mixture provides a noticeable drop in cell temperature compared with the uncooled [panel],” said the Egyptian team.

The researchers said a mixture of water and the Al2O3/PCM liquid outperformed the use of water alone and the best performance recorded used 75% water and 25% Al2O3/PCM.

The research findings are explained in more detail in the paper “Performance enhancement of the photovoltaic cells using Al2O3/PCM mixture and/or water cooling-techniques,” published in the journal Renewable Energy.

Whether this is a cost effective solution — allowing for enough extra revenue through greater energy production (thanks to greater efficiency) than the solution costs — is not discussed. Assuming it is cost effective in some regions, those would presumably be places that get quite hot.

 


 

Cynthia Shahan