Search for any green Service

Find green products from around the world in one place

Sustainable Cooling: Electrocaloric Cooling Breakthrough

Sustainable Cooling: Electrocaloric Cooling Breakthrough

As heatwaves intensify across the globe, the demand for air conditioning and refrigeration skyrockets. The ballooning demand for cooling strains energy infrastructure and escalates emissions from vapor compression systems. These conventional refrigerators and AC units rely on greenhouse gases and inefficient mechanical compressors that have reached their efficiency limits. With little room for improvement, vapor compression technology cannot sustainably shoulder doubling cooling demands. Scientists urgently search for climate-friendly innovations before the warming world overheats.

In a breakthrough discovery, researchers at the Luxembourg Institute of Science and Technology (LIST) pioneer a radically different cooling approach harnessing the electrocaloric cooling effect. This phenomenon describes particular ceramic materials that heat up or cool down when electric fields flip on and off. By cleverly leveraging this conductivity toggle, the LIST team designed an assembly that can pump heat without noisy, energy-draining compressors.

Electrocaloric cooling is a fascinating phenomenon where certain materials experience a reversible temperature change when an electric field is applied. In simpler terms, you can directly use electricity to manipulate their temperature, creating a cooling effect. This opens up exciting possibilities for energy-efficient and environmentally friendly cooling technologies.

The regenerative system developed by LIST alternates layers of electrocaloric capacitors with liquid coolant. Switching an electric field pulls heat from the fluid into the capacitors, cooling the system. Cutting voltage then dissipates the heat, so the cycle repeats. The smooth back-and-forth between hot and cold replaces high-maintenance mechanical parts with solid-state reliability. Scientists calculate that electrocaloric cooling efficiency leapfrogs vapor compression refrigeration by directly shuffling heat instead of wasting effort compressing refrigerants.

Since fluids naturally stratify by temperature, no added energy input is required to cycle hot and cold. The passive electrocaloric cooling generator minimizes electricity demands by exploiting thermodynamics rather than fighting against them. With game-changing energy savings over traditional refrigerator designs, this electrocaloric cooling technology paves the way for truly sustainable cooling.

Seeking real-world integration, LIST researchers collaborate with manufacturing partners to develop prototypes. The original discovery featured a single electrocaloric part, which limited heat transfer speed. The current regenerator assembly overcame this by interleaving many capacitors with parallel coolant channels. This boosts heat pumping capacity for powerful, real-world performance. Ongoing enhancements also aim to lower costs and extend operating lifetimes to enable widespread commercialization.

While the immediate goal focuses on eco-friendly refrigeration, the applications likely won’t stop there. Any process generating unwanted heat could benefit from electrocaloric cooling technology. Air conditioners, electronics cooling, industrial processes and even solar energy storage represent prospective opportunities. Because electrocaloric cooling systems thrive when miniaturized, microchip-level cooling also offers possibilities for computing breakthroughs.

For example, electrocaloric cooling films could provide on-chip cooling for high-performance computer processors, enabling faster computing speeds. Electrocaloric cooling systems can also be used to condense water vapor in air conditioning and dehumidification applications. This could allow environmentally-friendly refrigerants like water instead of HFCs to be used in vapor compression HVAC.

Additionally, the flexibility of electric-powered cooling lends well to renewable energy integration and smart grid load balancing. Electrocaloric heat pumps powered by wind or solar electricity during times of excess generation could store thermal energy for later dispatch while synchronizing supply and demand on the grid. With materials and system configuration innovations, electrocaloric cooling technologies show promise for revolutionizing thermal management across many sectors.

Despite enormous promise, unanswered questions remain regarding large-scale manufacturing and durability. However, early indications suggest the regenerator’s simple solid-state design will prove reliable over long stretches. By dodging complex mechanical components, the approach naturally steers towards sustainability. Cooling demand will only climb higher as climate change continues, but creative solutions like the LIST electrocaloric cooling regenerator offer hope we can innovate our way to a cooler future.

 

 


 

 

Source  Happy Eco News 

Salt solution cools computers, boosts performance

Salt solution cools computers, boosts performance

Researchers at the City University of Hong Kong found the secret to a more efficient, less expensive approach to keeping massive computer systems cool: Just add salt.

A growing concern in computing is the enormous amount of heat generated in ever-increasing global computer arrays churning out more than 2 zettabytes per week.

Such gigantic processing capacity leaves an enormous carbon footprint. Commercial cloud providers utilize cooling systems requiring billions of gallons a year to maintain optimal temperatures.

According to the MIT Press Reader, cooling processes account for more than 40% of electricity usage. A single data center can consume the same amount of electricity as 50,000 homes.

“As a result, the cloud now has a greater carbon footprint than the airline industry,” anthropologist Steven Gonzalez Monserrate wrote in an MIT Press article last year.

Wei Wu, a professor in the School of Energy and Environment at the Hong Kong university, devised a system with several colleagues that improves upon current heat dissipation technology.

In a paper published Oct. 31 in the journal Device, Wu described a process in which water containing the salt lithium bromide relies on evaporation and reabsorption to keep temperatures low.

The process is “a passive thermal management strategy that relies on moisture desorption from hygroscopic salt solutions through a protective membrane that only allows water vapor to pass through,” Wu said.

The porous membrane is set in a structure that prevents any salty solution from contact with computer components. A heat sink directs accumulated heat away from sensitive electronics.

Wu, in his paper, “Membrane-encapsulated, moisture-desorptive passive cooling for high-performance, ultra-low-cost, and long-duration electronics thermal management,” said the device “can spontaneously and quickly recover its cooling capacity by absorbing water vapor from the air during off hours.” He compared the process to nature, where mammals regulate body temperature by sweating and rehydrating.

The high moisture absorption capacity and low cost of the lithium bromide-treated water offers a clear advantage over competing cooling strategies using hydrogels and metal-organic frameworks. Those systems require time-consuming regeneration rates and require active replenishment of water supplies.

“In contrast, hygroscopic inorganic salts, such as LiCl and LiBr, show promise in addressing these issues due to their extremely high moisture absorption capacity and low cost,” Wu said.

Applying the process to a single computer, the researchers measured an improvement of more than 32% in performance. They also said the process was completed “with a record-high cost effectiveness.”

“Poor thermal management can cause tremendous heat accumulation within electronic devices, resulting in the loss of functionality and, eventually, device failure,” Wu said. “We demonstrate that the proposed strategy is capable of offering a long-duration stable cooling capacity without solution leakage and corrosion, which can suppress the temperature rise of an emulated heater with a record-high cost effectiveness compared with state-of-the-art passive cooling strategies.”

The cooling strategy, Wu said, is cost effective and highly scalable, and “can be useful for various cooling applications with few technological barriers.”

 

 


 

 

Source  Tech Xplore

The Five Best Ways for Free Home Cooling with No AC

The Five Best Ways for Free Home Cooling with No AC

It’s hot these days. Here are the five common sense ways for home cooling with no AC.

  1. Close your curtains and blinds during the day. This will help to keep the sun’s heat out of your home. If you don’t have curtains or blinds, you can use sheets or towels to cover your windows. Close your curtains and blinds during the day.
  2. Run ceiling fans. Ceiling fans can help to circulate the air in your home, which can help to keep you cool. If you have a ceiling fan, ensure it is set to blow down.
  3. Use fans to create a cross breeze. If you have windows on opposite sides of your home, you can open them to create a cross breeze. This will help to draw the cooler air in from outside and push the hot air out.
  4. Take cool showers or baths. Taking a cool shower or bath can help to lower your body temperature. You can also use a wet towel to cool down your neck and forehead.
  5. Cook outside and unplug devices. Cooking outside on a barbeque, camp stove, RV, or other appliance outside will help keep your house cooler. The heat generated by an oven or a stove can quickly counteract any other efforts you made throughout the day.

Here are some additional tips to keep your home cool without air conditioning:

  • Ventilate your home at night. If it’s cooler outside than it is inside, open your windows at night to let in the cool air and begin the next day with a nice cool house.
  • Plant trees around your home. Trees can help to shade your home and keep it cooler in the summer.
  • Use reflective insulation. Reflective insulation can help to reflect the sun’s heat away from your home.
  • Seal up any air leaks. Air leaks can let in hot air, so sealing them up is important.

By following these tips, you can keep your home cool without air conditioning and save money on your energy bills.

 

 


 

 

Source  Happy Eco News

Could this colourful plant-based film replace the need for air conditioning?

Could this colourful plant-based film replace the need for air conditioning?

Scientists at Cambridge University in the UK are working on an eco-friendly alternative. Their invention consists of a plant-based film that stays cool when exposed to sunlight.

The material could someday be used to keep buildings and cars cool without the need for external power. Coming in a range of textures and bright iridescent colours, it’s aesthetically pleasing too.

How does the eco-friendly cooling film work?

For a material to stay cooler than the air around it during the daytime, there are two critical requirements. It must have high solar reflectance to reflect the warmth of the sun and not heat the air around it. It must also have a high emissivity in infrared bands to emit heat into outer space efficiently.

Only a few materials have these properties and scientists are already developing them into paints and films capable of what is known as ‘passive daytime radiative cooling’ (PDRC).

When applied to the surface of a car or building, it means that these materials create a cooling effect without consuming electricity or creating pollution.

How can PDRC materials be made more attractive?

Since they need to be solar reflective, PDRC materials are usually white or silver.

Adding colour would decrease their cooling performance. This is because coloured pigments selectively absorb specific wavelengths of light, only reflecting the colours we see. This extra light absorption creates a warming effect.

“These limited colours hinder the applications where visual appearance is a key consideration, such as for architecture, cars and clothes,” says project member, Dr Qingchen Shen.

To increase the desirability of these materials, colour is an important factor.

Along with the project’s lead investigator, Dr Silvia Vignolini, Dr Shen set out to research ways of achieving colour without the use of pigments.

They looked to structural colouration as a solution. This is where shapes and patterns reflect specific colours of light without the presence of pigmentation, as seen on soap bubbles and oil slicks.

Seeking a natural source of this phenomenon, the research team used cellulose nanocrystals (CNCs) – derived from the cellulose found in plants – to create iridescent, colourful films without any added pigment.

“We specifically use cellulose-based materials for our films because cellulose is the most abundant polymer in nature,” says Dr Shen.

It is also one of the few natural materials capable of promoting PDRC.

After experimenting with basic colours, the researchers are now working on glittery CNC-ethyl cellulose films. They are also developing different textures that could blend in with various wood finishes.

How effective is the colourful cooling film?

The researchers created layered cellulose films in vibrant blue, green and red colours and put them to the test.

When placed under sunlight, they were an average of nearly 4°C cooler than the surrounding air.

One square metre of the film generated over 120 watts of cooling power, rivalling many types of residential air conditioners.

As a general guideline, bedrooms require around 80 watts per square metre and living spaces 125 watts of air conditioning capacity.

The researchers hope to find new ways to leverage CNC-ethyl cellulose films. These include adding sensors to detect environmental pollutants or weather changes.

Ultimately, they hope the film coating could serve several purposes at once. It could be used to both cool buildings and to alert to changing levels of pollutants in congested areas, for example.

 

 


 

 

Source Euronews Green

Five sustainable solutions to help tackle extreme heat in South Asia

Five sustainable solutions to help tackle extreme heat in South Asia

As the world warms, there is an urgent need to find ways to keep people cool. This year, several deadly records have been set in South Asia: in New Delhi, the highest July temperature in 90 years was recorded, at 43.6 degrees Celsius. In April in Karachi, mercury levels hit 44C — the highest in 74 years.

Last week, the climate analysis coalition Climate Action Tracker published research showing that even if the new pledges made by the world’s governments in the first week of COP26 are achieved, global temperatures would rise by more than 2.4C this century. This coincided with the publication of research showing that with just a 2C global temperature rise, a billion people will be affected by extreme heat stress.

Even at 1.5C of global warming (the aspirational target set by the Paris Agreement), studies have found that deadly heat stress could become common across South Asia. Despite pledges to control greenhouse gas emissions, scientists say the world could reach the 1.5C threshold in a matter of years.

There is therefore a pressing need for sustainable cooling technologies and practices that are both low-carbon and accessible to the poorest people — who are also most at risk of heatwaves. And, crucially, there needs to be grassroots support for the proposed solutions.

“We cannot agree on global multilateral solutions if we don’t have local, appropriate implementation,” said Carlos Alvarado Quesada, president of Costa Rica, speaking in Glasgow on 4 November at an awards ceremony held by Ashden, a UK charity that supports solutions to the problems caused by climate change. “Implementation has to be done locally, respecting women, respecting indigenous communities [and] working together with them.”

This year’s Ashden Awards, attended by The Third Pole, recognised the importance of sustainable cooling. Many of the projects highlighted below are recipients of finance via its Fair Cooling Fund, which aims to scale up “frontline fair cooling solutions”.

 

1. Empowering women through low-cost solutions

Houses in poor neighbourhoods are usually built from cement, often with plastic covers or tin sheets to keep the rain out. These materials absorb heat, and create hot and stuffy living conditions. As urban populations increase and the impacts of global warming become more apparent, the problems will worsen — with knock-on impacts for sanitation and health. Women are particularly exposed, as their work often takes place within the home.

Mahila Housing Trust (MHT) is a not-for-profit organisation based in Ahmedabad. It works in 10 cities across India to boost communities’ resilience to heat stress. It provides women with advice on how to cool their homes in ways that are easily implemented and affordable: to date, more than 1,600 women have been educated about climate change and how to deal with some of its effects.

The techniques focus on passive cooling methods — preventing heat from building up within people’s homes. One of the quickest and easiest to implement is painting roofs and sun-facing walls with solar-reflective paint, which can reduce indoor temperatures by 4-5C. According to the Global Cool Cities Alliance, when sunlight hits a light-coloured roof, 80 per cent of its energy is reflected, compared with 5 per cent for a dark-coloured roof.

A second easy step MHT advises is to grow potted plants and creepers on roofs, which the charity says can reduce indoor temperatures by 2.5C. Vegetation has been proven to have a cooling effect through shading and evapotranspiration. MHT has helped about 200 houses in Bhopal and Ranchi to do this.

MHT also advises on and helps with renovating roofs. The replacement structures have vents and are made from recycled materials that let more light in without trapping heat. According to MHT, these can reduce temperatures by 6-7C. Finally, the charity trains women on principles for reducing heat stress. For example, said Aneri Nihalani, MHT’s communications officer, considering the orientation of a building during construction can help reduce overheating. Taking these steps can help with the family’s finances as well as their comfort, as they need less electricity to cool their homes.

Since 2014, the Mahila Housing Trust has helped more than 2,000 families to adopt heat-resilient measures. In recognition of its work, MHT won the 2021 Ashden Award for Cooling in Informal Settlements, which was presented at COP26.

 

2. Geothermal air-conditioning

The temperature on the surface of the Earth fluctuates constantly. But below the Earth’s surface there is little change in temperature. The founders of GeoAirCon, a company in Pakistan, have harnessed this stability to cool homes down.

In a GeoAirCon system, a ‘loop’ of underground pipes filled with fluid is installed. Geothermal heat pumps move heat around the system. During the summer, these pipes draw heated water from the building and move it underground. (In winter, the opposite principle applies to warm the house.)

According to the company, the temperature of the earth about 8-12 feet below the surface in Pakistan ranges from 21-25C. GeoAirCon systems can therefore cool buildings to this range — a comfortable temperature for the human body.

GeoAirCon says geothermal systems are twice as efficient in cooling as the most efficient conventional air-conditioning system. Cooling capacity is influenced heavily by the insulation of a building, M Hassamuddin, chief executive of GeoAirCon, told The Third Pole, so use of passive cooling best practices is also advised.

A system costs US$260-460 to install, and costs significantly less to run than a conventional air-conditioning unit, according to the company. Hassamuddin said that though more suited to houses with outdoor spaces, the technology can be installed in densely populated areas, with an area less than a metre wide required to make the hole for the underground pipes.

So far, GeoAirCon systems have been installed in 12 buildings in Pakistan. GeoAirCon was runner up for the 2021 Ashden Award for Cooling in Informal Settlements.

 

3. Low-impact cooling systems

In 2015, eight million air conditioners were installed in India. That number is expected to grow by 200-300 million in the next 20 years. But traditional air conditioning is expensive, electricity-intensive and often uses greenhouse gases like HFCs, exacerbating the climate crisis.

CBalance, an Indian consultancy that has also received financial support from Ashden, is working to reduce the reliance on conventional air-conditioning. It promotes passive cooling design and ventilation, fostering cooperation between architects and urban communities through its Fairconditioning programme. Hasan ul Banna Khan, an engineer working on Fairconditioning, told The Third Pole that in most cases a building can maintain a comfortable temperature using just passive design techniques coupled with sustainable cooling systems.

Having reduced the requirement for artificial cooling as much as possible, it also promotes technologies that reduce the energy and greenhouse gas intensity of cooling.

 

These include:

• Evaporative cooling, which uses evaporated water to cool air. Unlike conventional air conditioning, this does not use refrigeration, and therefore requires a lot less energy. In one building in Pune, this system reduces the need for conventional AC by 40 per cent.

• Radiant or structure cooling, where cool water is circulated through a building. The technology has been used in 73 large buildings in India, including the Indian Institute of Tropical Meteorology in Pune.

• Use of solar power to chill water.

• Air-conditioning units that are more energy-efficient and emit fewer HFCs.

 

4. Cool roofs programmes

Under the Ahmedabad Heat Action Plan (HAP) in India, a partnership between the municipal corporation, Indian Institute of Public Health and the Natural Resource Defence Council, more than 7,000 low-income households’ roofs have been painted white. It is estimated that such initiatives save an estimated 1,100 lives every year.

On a bigger scale, the Million Cool Roofs Challenge is a US$2 million philanthropic initiative to rapidly scale up the use of solar-reflective roofs as a form of sustainable cooling in developing countries suffering heat stress. Ten teams are awarded grants of US$100,000.

In 2019, one of the finalists was the team from Bangladesh, a country with high humidity levels and where ambient temperatures are already reaching 40C. The Bangladesh team painted the roofs of two factories and 105 other buildings in Dhaka, including a nursery and a school, with average indoor air temperatures falling by more than 7C.

 

5. Vernacular architecture providing sustainable cooling

Architects and builders can also look to traditional materials, techniques and designs, which have kept occupants cool for centuries. In one project in Rudrapur, north Bangladesh, students and architects worked with local architects and craftsmen to create houses for low-income families. Using mud and bamboo alongside manmade materials, they installed openings for cross-ventilation, insulation made from coconut fibre and glass windows.

Traditional stilt houses, such as those found in Assam, also use passive cooling. The structures enable cross-ventilation and shading. The walls, which are left unplastered, promote natural ventilation. Recently, projects have started to combine traditional models with materials to enhance their resilience to extreme weather.

 

The importance of policymakers and urban planning for sustainable cooling

As global emissions drive temperatures to new highs, there is an urgent need to roll out these methods and technologies more widely, at the same time as taking urgent action to limit global warming. Both Aneri Nihalani from MHT and GeoAirCon’s M Hassamuddin told The Third Pole that finance is the main obstacle to wider adoption of the solutions their organisations offer.

Hasan ul Banna Khan from the Fairconditioning programme said there is still a lack of awareness of the impacts of conventional air-conditioning, as well as “a dearth of motivated and skilled architects and engineers in the sustainable building design sector”.

Beyond that, urban planners and policymakers need to step in. In Vietnam, the Hanoi City Master Plan 2030 builds the growing need for sustainable urban cooling into the country’s commitment to be net zero by 2050. It aims to prevent heat build-up throughout the city, using ventilation corridors of green and blue space.

As South Asia warms and urbanises, cities will need to put similar heat adaptation and mitigation measures at the heart of their development plans.

This story was published with permission from The Third Pole.

 


 

Source Eco Business