Search for any green Service

Find green products from around the world in one place

Desalination system could produce freshwater that is cheaper than tap water

Desalination system could produce freshwater that is cheaper than tap water

Engineers at MIT and in China are aiming to turn seawater into drinking water with a completely passive device that is inspired by the ocean, and powered by the sun.

In a paper appearing in the journal Joule, the team outlines the design for a new solar desalination system that takes in saltwater and heats it with natural sunlight.

The configuration of the device allows water to circulate in swirling eddies, in a manner similar to the much larger “thermohaline” circulation of the ocean. This circulation, combined with the sun’s heat, drives water to evaporate, leaving salt behind. The resulting water vapor can then be condensed and collected as pure, drinkable water. In the meantime, the leftover salt continues to circulate through and out of the device, rather than accumulating and clogging the system.

The new system has a higher water-production rate and a higher salt-rejection rate than all other passive solar desalination concepts currently being tested.

The researchers estimate that if the system is scaled up to the size of a small suitcase, it could produce about 4–6 liters of drinking water per hour and last several years before requiring replacement parts. At this scale and performance, the system could produce drinking water at a rate and price that is cheaper than tap water.

“For the first time, it is possible for water, produced by sunlight, to be even cheaper than tap water,” says Lenan Zhang, a research scientist in MIT’s Device Research Laboratory.

The team envisions a scaled-up device could passively produce enough drinking water to meet the daily requirements of a small family. The system could also supply off-grid, coastal communities where seawater is easily accessible.

Zhang’s study co-authors include MIT graduate student Yang Zhong, and Evelyn Wang, the Ford Professor of Engineering, along with Jintong Gao, Jinfang You, Zhanyu Ye, Ruzhu Wang, and Zhenyuan Xu of Shanghai Jiao Tong University in China.

 

A powerful convection

The team’s new system improves on their previous design—a similar concept of multiple layers, called stages. Each stage contained an evaporator and a condenser that used heat from the sun to passively separate salt from incoming water.

That design, which the team tested on the roof of an MIT building, efficiently converted the sun’s energy to evaporate water, which was then condensed into drinkable water. But the salt that was left over quickly accumulated as crystals that clogged the system after a few days. In a real-world setting, a user would have to place stages on a frequent basis, which would significantly increase the system’s overall cost.

In a follow-up effort, they devised a solution with a similar layered configuration, this time with an added feature that helped to circulate the incoming water as well as any leftover salt. While this design prevented salt from settling and accumulating on the device, it desalinated water at a relatively low rate.

In the latest iteration, the team believes it has landed on a design that achieves both a high water-production rate, and high salt rejection, meaning that the system can quickly and reliably produce drinking water for an extended period.

The key to their new design is a combination of their two previous concepts: a multistage system of evaporators and condensers, that is also configured to boost the circulation of water—and salt—within each stage.

“We introduce now an even more powerful convection, that is similar to what we typically see in the ocean, at kilometer-long scales,” Xu says.

The small circulations generated in the team’s new system is similar to the “thermohaline” convection in the ocean—a phenomenon that drives the movement of water around the world, based on differences in sea temperature (“thermo”) and salinity (“haline”).

“When seawater is exposed to air, sunlight drives water to evaporate. Once water leaves the surface, salt remains. And the higher the salt concentration, the denser the liquid, and this heavier water wants to flow downward,” Zhang explains. “By mimicking this kilometer-wide phenomena in small box, we can take advantage of this feature to reject salt.”

 

Tapping out

The heart of the team’s new design is a single stage that resembles a thin box, topped with a dark material that efficiently absorbs the heat of the sun. Inside, the box is separated into a top and bottom section. Water can flow through the top half, where the ceiling is lined with an evaporator layer that uses the sun’s heat to warm up and evaporate any water in direct contact.

The water vapor is then funneled to the bottom half of the box, where a condensing layer air-cools the vapor into salt-free, drinkable liquid. The researchers set the entire box at a tilt within a larger, empty vessel, then attached a tube from the top half of the box down through the bottom of the vessel, and floated the vessel in saltwater.

In this configuration, water can naturally push up through the tube and into the box, where the tilt of the box, combined with the thermal energy from the sun, induces the water to swirl as it flows through. The small eddies help to bring water in contact with the upper evaporating layer while keeping salt circulating, rather than settling and clogging.

The team built several prototypes, with one, three, and 10 stages, and tested their performance in water of varying salinity, including natural seawater and water that was seven times saltier.

From these tests, the researchers calculated that if each stage were scaled up to a square meter, it would produce up to 5 liters of drinking water per hour, and that the system could desalinate water without accumulating salt for several years. Given this extended lifetime, and the fact that the system is entirely passive, requiring no electricity to run, the team estimates that the overall cost of running the system would be cheaper than what it costs to produce tap water in the United States.

“We show that this device is capable of achieving a long lifetime,” Zhong says. “That means that, for the first time, it is possible for drinking water produced by sunlight to be cheaper than tap water. This opens up the possibility for solar desalination to address real-world problems.”

 

 


 

 

Source  Tech Xplore

San Francisco’s Plans to Recycle Wastewater

San Francisco’s Plans to Recycle Wastewater

Wastewater is used water that has been affected by domestic, industrial, and commercial use. It includes uses like flushing toilets, doing laundry, washing dishes, and basically anything else that puts used water into a drain. While high-income countries treat about 70% of the wastewater they generate on average, only 38% and 28% of wastewater are treated in upper-middle-income and lower-middle-income countries, respectively.

The untreated water is discharged directly into the environment, particularly into the ocean, where it can have significant problems. Ecosystems can be affected by oxygen depletion, biodegradation of organic materials and water-borne pathogens. More so, pharmaceuticals and heavy metals that end up in our wastewater will harm ocean environments.

To address the problem of wastewater, San Francisco is looking at ways to recycle wastewater from commercial buildings, homes and neighbourhoods and use it for toilets and landscaping. The city is planning to equip new commercial and residential buildings with on-site recycling plants that will make water for nonpotable use cheaper than buying potable water from a centralized source.

The unit called the Onsite Water Reuse program can be installed in basements where its collection of pipes will collect water from sinks, showers and laundry. The system will recycle wastewater with membrane filtration, ultraviolet light and chlorine and then be sent back upstairs to be used again for nonpotable uses. According to the San Francisco Public Utilities Commission, which will have over 80 systems installed across the city, the Onsite Water Reuse program will save 1.3 million gallons of potable water daily. They hope that these new buildings will be completely self-sufficient by using the same water over and over, potable and nonpotable, in a closed loop.

This reuse and recycle wastewater system isn’t entirely new in San Francisco. In 2015, the city required more than 100 000 square feet of new buildings to have on-site recycling systems. To date, six blackwater (water from toilets) and 25 greywater systems (water from washing machines) are using the technology to recycle wastewater.

The San Francisco Public Utilities Commission’s headquarters have a blackwater system that treats its wastewater in engineered wetlands built into the sidewalks around the building. The water is then used to flush low-flow toilets and urinals. Their blackwater system has reduced the building’s imported potable supply by 40 percent. A water recycling company has even brewed a beer with purified graywater from a 40-storey San Francisco apartment building.

With megadrought and water crises becoming even more prominent in light of climate change, decentralized water systems and the ability to recycle wastewater are becoming more important. The safety of direct reuse of recycled wastewater is still being studied, and US regulations still do not allow it. Still, there is potential for a fully circular system to recycle wastewater to become a reality in the near future. We have already seen centralized recycled water systems being used in California as a solution to water shortages. Highly treated wastewater, normally discharged into the ocean, is treated and injected into nearby groundwater. The water is then pumped up and treated to drinking water standards by local utilities.

Moreover, ability to recycle wastewater will also save on the costs of pumping water over long distances and the costs associated with digging up streets to replace and install pipelines. We have the solutions to reduce water scarcity and recycle the resources we already have; we just have to be able to implement them. Representatives from water-stressed cities around the world are even coming to San Fransisco to study their recycling systems, so it may become a reality across the globe.

 

 


 

 

Source  Happy Eco News

Atmosphere to Water Generators: Veggies in the Desert

Atmosphere to Water Generators: Veggies in the Desert

The world is facing a water crisis. Atmosphere to Water Generators (AWGs) can help alleviate this problem in hot, dry locations.

As the population grows and climate change intensifies, water resources have become increasingly unpredictable and erratic. In arid environments, such as deserts, water is especially scarce. This is a major challenge for agriculture, as water is essential for growing food.

There has been growing interest in developing new technologies to produce water from air in recent years. The idea is not new; throughout history, ancient cultures have used dew fences and other passive means to harvest moisture from the air – even the very dry air of deserts. A quick look online shows several free or near-to-free ways to generate water, such as Kumulus water generators; solar-powered machines capable of producing 20 to 30 liters of healthy drinking water daily.

A new study published in Cell Reports Physical Science has demonstrated the potential of Atmosphere to Water Generators to produce water in arid environments using waste heat from solar panels. With SolarAtmosphere to Water Generators, it may be possible to grow food in the desert without relying on scarce freshwater resources. This could address the global water crisis and provide food security for a growing population.

 

How Atmosphere to Water Generators Work

Atmosphere to Water Generators work by using the heat from sunlight to evaporate water from the air. The water vapor is then condensed into liquid water. The process of evaporation requires energy, and the heat from sunlight provides this energy. The water vapor is then condensed into liquid water by cooling it down. This can be done by passing the water vapor through a cold pipe or by using a fan to blow cold air over it.

Atmosphere to Water Generators are typically made up of two main components: a solar collector and a condenser. The solar collector is used to collect the heat from sunlight. The condenser is used to condense the water vapor into liquid water.

 

Solar First then Water

In the system explained by the Cell Reports Physical Science study, the system was first designed to enable solar panels to work more efficiently; water production was just a happy byproduct.

Solar panels have been getting better and cheaper in recent years, but overall they still are relatively inefficient. This inefficiency is made worse by heat – a big problem for systems located in very hot deserts. Further, just like any other piece of electronics, a solar panel lasts longer when kept cool, which is also a problem in a harsh desert environment.

The solution was to coat the back of the panels with hydrogel, a product that absorbs water from the air at night, then releases it through evaporation as it heats during the day. As the water evaporates, it cools the solar panels making them work more efficiently and last longer.

This evaporated water is then captured and saved for crop irrigation. Deserts are places of extreme heat – daytime temperatures are hot, but nighttimes are very cool, making them the perfect place to maximize the performance of a system like this.

The study found that Solar Atmosphere to Water Generators can produce up to 1.5 liters of water per day per square meter of solar cell area. This is enough water to support the growth of vegetables in a desert environment.

The study’s findings can potentially revolutionize agriculture in arid environments, said the authors.

 

Challenges and Opportunities

There are a number of challenges that need to be addressed before Atmosphere to Water Generators can be widely adopted. One challenge is the cost. They are still relatively expensive, but the cost is expected to come down as the technology is developed further and the costs may be negligible when included in the design and commissioning of a large solar farm. More so when combined with the benefits of increased solar panel efficiency and lifespan.

Another challenge is efficiency. Solar Atmosphere to Water Generators are not yet as efficient as other methods of water production, such as desalination. However, due to the fact is essentially a passive system with very little maintenance and low cost, the efficiency of Solar Atmosphere to Water Generators is not as important as other types, and of course, the cost is expected to improve as the technology is developed further.

Despite these challenges, Solar Atmosphere to Water Generators have the potential to make a significant contribution to solving the global water crisis. With continued research and development, they could become a major water source for agriculture in arid environments.

 

 


 

 

Source  Happy Eco News

Singapore introduces framework for sovereign green bonds ahead of inaugural issuance

Singapore introduces framework for sovereign green bonds ahead of inaugural issuance

Singapore on Thursday (Jun 9) published the governance framework for sovereign green bonds, ahead of the first such issuance expected in the next few months.

This comes as Singapore moves to develop the green finance market and make green finance a driving force for sustainability.

The Singapore Green Bond Framework sets out guidelines for public sector green bond issuances under the Significant Infrastructure Government Loan Act 2021 (SINGA), said the Ministry of Finance (MOF) and the Monetary Authority of Singapore (MAS) in a media release.

It covers the Government’s intended use of green bond proceeds, governance structure to evaluate and select eligible projects, operational approach to manage green bond proceeds, and commitment to post-issuance allocation and impact reporting.

In addition to providing the foundation for green bonds issued by the Government, the framework will also serve as a reference for statutory boards that issue their own green bonds.

The key principles considered in the development of the framework were alignment with internationally recognised market principles and standards; stringent governance and oversight of project selection and allocation of proceeds; and technical screening to evaluate and identify green projects, MOF and MAS said.

 

 

Eligible expenditures

At Budget 2022, Finance Minister Lawrence Wong announced that the Government would issue S$35 billion of green bonds by 2030 to fund public sector green infrastructure projects.

Proceeds from these bonds, which will be issued under the new framework, will be used to finance costs associated with the Singapore Green Plan 2030, MOF and MAS said.

In turn, the eligible green projects are expected to facilitate the transition to a low-carbon economy in Singapore and contribute to the climate-related and environmental goals set out by the Singapore Government.

The categories of “eligible green expenditures” are:

  • Renewable energy
  • Energy efficiency
  • Green building
  • Clean transportation
  • Sustainable water and wastewater management
  • Pollution prevention, control and circular economy
  • Climate change adaptation
  • Biodiversity conservation and sustainable management of natural resources and land use

 


 

Source CNA