Search for any green Service

Find green products from around the world in one place

Bill Gates backs a carbon-capture start-up that uses dirt cheap material

Bill Gates backs a carbon-capture start-up that uses dirt cheap material

A California-based start-up has found a way to use limestone — a cheap and widely available material — to remove carbon dioxide directly from the air, potentially overcoming a major hurdle in scaling up the technology needed to avoid catastrophic global warming.

Heirloom Carbon Technologies said Thursday it raised $53 million from investors including Breakthrough Energy Ventures, a clean-technology fund led by Bill Gates, and the Microsoft Climate Innovation Fund.

As a growing number of companies have set goals to reach net-zero emissions in the coming decades, demand has surged for ways to offset their ongoing pollution. However, experts warn that cheap credits based on avoiding deforestation or building renewable energy projects tend to exaggerate their climate benefits. Technologies that actually remove carbon from the atmosphere can more credibly back the promise of capturing and storing a set amount of greenhouse gas.

But those technologies are still nascent and often require complex machinery, making them tens of times more expensive than carbon credits from projects that plant trees or build wind farms, which can cost as little as $3 per ton.

One reason for the high cost is that direct-air capture technology has so far relied on the use of expensive solvents that can separate CO₂ from the air, like iron filings to a magnet. Once the gas is bound to the solvent, it needs to be heated to a high temperature to release the CO₂, which can be captured, compressed, and buried deep underground in rock formations similar to those that hold oil and natural gas.

Heirloom uses a similar process, without the expensive solvents. The company starts by heating limestone, also known as calcium carbonate, to more than 600°C in an electric furnace that’s powered by renewable electricity — the most energy-intensive and expensive step. The process releases CO₂ — which is captured — and the leftover calcium oxide is spread out in hundreds of trays that are stacked 20-feet high and exposed to the air.

“It looks like cookies in a baking tray,” said Heirloom Chief Executive Officer Shashank Samala. “We’re trying to simplify as much as possible.”

Over months or years, calcium oxide gets converted back to limestone as it absorbs CO₂ from the air. But Heirloom says that by turning the material into a fine powder and carefully placing the trays to maintain the right conditions, it can shrink the process down to a week. Once calcium carbonate is created, the cycle is repeated 15 times or so before the material isn’t able to effectively capture CO₂.

Samala declined to provide more details on the company’s approach because some of the tweaks it has made to accelerate the capture process are quite simple and yet to be patented. The engineering work “could be easily replicated by others, even with a couple of clues,” said Julio Friedmann, chief scientist at Carbon Direct Capital Management, another fund that contributed to Heirloom’s latest investment round.

Heirloom has so far only tested the different steps in its process individually. The new money will be used to build a pilot plant by next year that will put them all together and attempt to capture a few tons of CO₂ every day. Unlike some other direct-air capture start-ups, Heirloom does not need to overcome basic science challenges, such as whether the capture process can actually work quickly, said Friedmann. The technology is based on peer-reviewed research published in 2020.

The most advanced direct-air capture companies include Switzerland-based Climeworks, which has sold credits to Gates for as much as $600 a ton, and Canada-based Carbon Engineering, which has been working for a few years with Occidental Petroleum to build a plant that could capture as much as 1 million tons each year.

Even though Heirloom has yet to build a facility of that size, technology companies Stripe, Shopify, Klarna Bank, and Wise have already paid for CO₂ it may capture in the future. Stripe said that it paid more than $2,000 a ton with the understanding that the cost will come down rapidly as the technology is scaled up. Heirloom aims to eventually lower the cost of its captured carbon to as little as $50 a ton.

 


 

Source Inquirer

European Investment Bank supports thermal, gravity energy storage projects

European Investment Bank supports thermal, gravity energy storage projects

The EU’s European Investment Bank has pledged support for a long-duration thermal energy storage project and a gravity-based energy storage demonstration project.

They have been selected among 15 projects defined as large-scale — each requiring capital costs of more than €7.5 million (US$8.5 million) — through EU Innovation Fund grants for Project Development Assistance (PDA), administered by the bank.

A total of 311 applications were received for clean energy or decarbonisation projects after the call for submissions opened last summer.

Of these, seven were selected to receive direct funding from a €1.1 billion budget and include hydrogen, carbon capture and storage, advanced solar cell manufacturing and other technologies.

The 15 among which the two energy storage projects were selected will receive PDA, technical assistance for various stages of their development.

The other 13 projects cover technologies including wind propulsion for cruise ships, hydrogen fuel cells for marine vessels, green methanol production, greenhouse gas (GHG) and carbon capture and storage, bioethanol, power-to-liquid for aviation fuels and other areas.

There is also an electric vehicle (EV) battery project, which will use ultra-pure electrolyte salt to improve lithium-ion batteries and a project to develop and upscale the synthesis of curved graphene and electrode production technologies.

 

Thermal energy storage project Sun2Store

Sun2Store, a 100MW/1,000MWh thermal energy storage project in Spain was selected for a PDA agreement. Using technology developed by US startup Malta Inc, the project will enable 10-hour duration storage of energy.

Malta Inc has developed a technology it calls ‘pumped heat’ electricity storage, which could provide up to 200 hours of storage, although the company is largely targeting 10 – 12 hour applications. It converts electricity to heat, which is then stored in molten salt. Simultaneously, the system produces cold energy stored in special vats of an anti-freeze-like cooling liquid.

The hot and cold energy are then converted back into electricity as required, using a temperature difference-driven heat engine. The company has raised funds from investors including Bill Gates’ Breakthrough Energy Ventures and is one of the founding members of the international Long Duration Energy Storage Council.

It has deals in place with equipment manufacturers Bechtel and Siemens Energy for co-development and supply of key components.

Funds have been granted to Malta Inc’s European affiliate company, Malta Iberia Pumped Heat Electricity Storage (Malta Iberia). The EIB will provide technical assistance to Malta Iberia, including an independent technology assessment, which will verify the storage facility’s key technical parameters.

Malta Inc recently announced plans for a similar-sized project in Canada.

 

Gravity storage project GraviSTORE

Scotland-headquartered startup Gravitricity was the other energy storage system industry recipient of a PDA agreement through the Innovation Fund.

The EIB will support Gravitricity’s plans to build a full scale 4-8MW project in a former mine shaft.

Located in mainland Europe, the project follows a 250kW demonstrator which operated in Scotland’s capital city Edinburgh throughout the summer and for which specialists appointed by the EIB have begun evaluating test results.

The results of the Edinburgh demonstrator are to be combined with a review of local revenue streams to produce a commercial risk assessment that will inform detailed design and development activities.

“We already have a high level of confidence in our technology and its ability to store energy effectively. What these studies will bring is increased understanding and confidence in how a full-scale project will play into a specific energy market,” said Chris Yendell, project development manager at Gravitricity.

Gravitricity’s energy storage solution works by raising weights in a deep shaft, with disused mine shafts currently being targeted by the firm, and releasing them when energy is required. Its proposed single weight full scale system could deliver up to 2MWh of energy storage, with future multi-weight systems having the potential for a capacity of 25MWh or more.

Alongside the test evaluations, the EIB has now also committed 120 days of consultancy time to advance the full scale project.

In October, Gravitricity engineers visited the recently mothballed Staříč mine in the Moravian Silesian Region of Czechia to investigate its potential for the project. The Gravitricity team is to head to mainland Europe later in January to further evaluate their shortlist, with a final selection decision expected within the next few months.

The firm is also exploring opportunities for a purpose-built prototype shaft at a brownfield location in the UK, where gravity storage could be combined with hydrogen and inter-seasonal heat storage.

Gravitricity story by Alice Grundy.

 


 

Source Energy Storage News