Search for any green Service

Find green products from around the world in one place

Danish energy fund to lead massive green hydrogen project in Spain, powered by wind and solar

Danish energy fund to lead massive green hydrogen project in Spain, powered by wind and solar
KEY POINTS
  • Firms will work together on Catalina Phase I, which will be made up of 1.7 gigawatts of wind and solar in Aragon, north east Spain, and a 500 megawatt electrolyzer.
  • Project Catalina will eventually look to develop a total of 5 GW of combined wind and solar, producing green hydrogen using a 2 GW electrolyzer.
  • Hydrogen has a diverse range of applications and can be deployed in a wide range of industries.

 

Plans for a huge project aiming to produce green hydrogen and ammonia have been announced, with those behind it hoping construction of the first phase will begin in late 2023.

On Tuesday, Copenhagen Infrastructure Partners announced details of a partnership with Spanish companies Naturgy, Enagás and Fertiberia. Vestas, the Danish wind turbine manufacturer, is also involved.

The firms will work together on Catalina Phase I, which will be made up of 1.7 gigawatts of wind and solar in Aragon, northeast Spain, and a 500-megawatt electrolyzer able to generate more than 40,000 tons of green hydrogen annually.

A pipeline will link Aragon with Valencia in the east of Spain, sending the hydrogen to a green ammonia facility. CIP said this ammonia would then be “upgraded” into fertilizer.

Project Catalina will eventually look to develop a total of 5 GW of combined wind and solar, producing green hydrogen using a 2 GW electrolyzer.

The scale of the overall development is considerable. “Once fully implemented, Catalina will produce enough green hydrogen to supply 30% of Spain’s current hydrogen demand,” CIP said.

Details relating to the financing of the initiative have not been revealed. CIP did say, however, that Project Catalina would make what it called a “significant contribution” to Spain’s Recovery, Transformation and Resilience Plan, or PERTE, on renewable energy, renewable hydrogen and storage.

In Dec. 2021, the Spanish government said PERTE would mobilize resources amounting to 16.37 billion euros, around $18.54 billion. According to authorities there, the private sector will supply 9.45 billion euros, with 6.92 billion euros coming from Spain’s Recovery, Transformation and Resilience Plan.

 

Hydrogen has a diverse range of applications and can be deployed in a wide range of industries. It can be produced in a number of ways. One method includes using electrolysis, with an electric current splitting water into oxygen and hydrogen.

If the electricity used in this process comes from a renewable source such as wind or solar then some call it green or renewable hydrogen.

Over the past few years, a number of firms have undertaken projects related to green hydrogen. Just last week, energy major Shell said a 20 megawatt hydrogen electrolyzer described as “one of the world’s largest” had begun operations.

In Dec. 2021, Iberdrola and H2 Green Steel said they would partner and develop a 2.3 billion euro project centered around a green hydrogen facility with an electrolysis capacity of 1 gigawatt.

While there is excitement in some quarters about green hydrogen’s potential, the vast majority of hydrogen generation is currently based on fossil fuels.

In recent times, some business leaders have spoken of the issues they felt were facing the emerging green hydrogen sector. Last October, for example, the CEO of Siemens Energy told CNBC there was “no commercial case” for it at this moment in time.

And in July 2021, a briefing from the World Energy Council said low-carbon hydrogen was not currently “cost-competitive with other energy supplies in most applications and locations.” It added that the situation was unlikely to change unless there was “significant support to bridge the price gap.”

The analysis — which was put together in collaboration with PwC and the U.S. Electric Power Research Institute — raised the question of where funding for such support would come from, but also pointed to the increasing profile of the sector and the positive effect this could have.

For its part, the European Commission has laid out plans to install 40 GW of renewable hydrogen electrolyzer capacity in the European Union by the year 2030.

 


 

Source CNBC

Vestas Introduces Low-Wind Variant Suited For India’s Wind Market

Vestas Introduces Low-Wind Variant Suited For India’s Wind Market

The global demand for sustainable energy solutions in low and ultra-low wind areas continues to grow as renewable technology improves in efficiency and cost. This trend is especially prominent in India, the world’s fourth largest wind energy market, where the energy demand is expected to double and the government intends to add around 100 GW wind power in the predominantly low-wind market by 2030.1

While the new turbine is globally applicable, it initially targets low and ultra-low wind condition projects in India and USA. It increases the turbine swept area by 67 percent in comparison to V120-2.2 MW, and with a large rotor to rating ratio, it significantly improves the partial load production in low-wind conditions. The V155-3.3 MW improves the annual energy production (AEP) by more than three percent for a 300 MW wind park with 46 fewer turbines, creating an improved level of business case certainty.2

“With the introduction of the V155-3.3 MW wind turbine, Vestas is connecting our proven 4 MW platform technology with customized solutions to improve our customers’ business case in low and ultra-low wind conditions,” says Thomas Scarinci, Senior Vice President of Product Management Vestas. “With this product designed specifically to optimise energy production in low and ultra-low wind conditions, we are confident that we can bring enhanced value to our customers and partners in India and other suited markets.”

As the turbine will be predominantly locally manufactured and sourced in India, it reinforces Vestas’ existing commitment to the country’s growing renewable energy industry. Vestas will increase its already prominent manufacturing footprint in India by establishing a new converter factory in Chennai and expanding its current blade factory in Ahmedabad. These investments follow our previously announced new nacelle and hub factory in Chennai, which is currently under construction. The production ramp-up will add around 1,000 new jobs within the next year to the approximately 2,600 people currently working for Vestas in India. While the expanded production setup in India will serve the growing wind market in the region, it will also act as a strategic export hub.

“We have installed close to 4 GW of wind turbines in India over the last two decades and established a large production footprint, and we’re excited to leverage this as we support the government’s ambitions for renewable energy. With the introduction of the V155-3.3 MW turbine, we are able to offer improved energy production and business case certainty for our customers in India’s growing wind market,” says Clive Turton, President of Vestas Asia Pacific. “With the production ramp up in India, we anticipate increased employment across our existing hubs, underlining our commitment to better support our customers and drive the country’s renewable energy transition.”

With an optimized blade design and market specific towers up to 140m hub height, the turbine is designed to meet local transportation requirements. Built on the globally proven 4 MW platform, the V155-3.3 MW features a full-scale converter delivering excellent grid compliance, faster active and reactive power during dynamic frequency and voltage events.

With 35 GW of 4 MW platform turbines installed in 47 countries, the V155-3.3 MW has been developed within Vestas’ leading standards within design, testing and manufacturing, ensuring customer’s business case certainty.

Prototype installation is planned for the third quarter 2021, while serial production is expected by the first quarter of 2022.

GWEC, India wind outlook toward 2022
Compared to V120-2.2 MW

 


 

Source: CleanTechnica