Search for any green Service

Find green products from around the world in one place

Intel is using hot water to cut natural gas use in its factories

Intel is using hot water to cut natural gas use in its factories

Intel’s new manufacturing plant in Leixlip, Ireland, which cost $18.5 billion to build, is replete with technologies touted for conserving energy and water including programmable, all-LED lighting and a water reclamation and filtration system that could save 275 million gallons a year.

One of its more unusual features, however, is an approach that’s often overlooked: capturing heat generated by equipment in the facility and funneling it into production processes rather than expelling it through cooling towers. This was accomplished by the installation of recovery chillers that capture heat created by Intel’s high-temperature manufacturing processes and pipe it in the form of heated water to other places at the facility.

Intel estimates these heat recovery measures will allow it to significantly cut the natural gas it must buy to run operations at the site, Fab 34. It will use nine times as much recovered energy than what is generated by other fuels, the company projects. That so-called “waste heat” can be used for tasks such as preheating the ultra-pure water Intel needs for semiconductor fabrication or keeping buildings at the site warm during cooler weather, said Rich Riley, principal engineer in Intel’s corporate services development group.

“If we didn’t have that heat, we would need that much more gas to facilitate the [heating, ventilation and air-conditioning] operations,” Riley said. “This is an overall reduction of natural gas consumption.”

Over time, Intel’s plan is to build on heat recovery and other energy efficiency measures by updating them with industrial equipment, such as heat pumps, that run on electricity.

Intel’s near-term energy-related sustainability goals include reducing Scope 1 and 2 emissions by 10 percent by 2030 from a 2019 baseline (it has achieved 4 percent as of fiscal year 2022); and conserving up to 4 billion kilowatt-hours cumulatively.

 

An untapped source of energy efficiency

Intel hasn’t disclosed the potential impact on its carbon emissions this heat recovery at Fab 34 effort could have, but a retrofit using water-to-water heat pumps in Fab 10 (also in Leixlip) will save an estimated 18.3 million kilowatt-hours of electricity annually. It will reduce Scope 1 emissions by about 4,760 metric tons, but Scope 2 emissions will increase by about 1,627 metric tons because of the electricity needed for the heat pumps.

Industrial energy remains a thorny challenge for corporate sustainability teams: An estimated 20 percent to 25 percent of energy consumed globally by industrial sources is still predominantly powered by coal and natural gas, according to the International Energy Agency.

The potential energy cost savings of using recovered waste heat for industrial processes, district heating applications or to generate electricity could reach up to $152.5 billion annually, slightly less than half the value of the natural gas imported by the European Union in 2022, according to a McKinsey report published in November. The analysis estimates the global recoverable heat potential is at least 3,100 terawatt-hours.

“In our view, if you want to decarbonize, heat recovery and waste heat is one of the most economical levers available,” said Ken Somers, a McKinsey partner who was one of the report’s authors. One barrier to adoption has been low natural gas prices, but tariffs and supply shortages have prompted companies to rethink their dependence, he said.

The industrial heat pump technology needed to move heat from where it’s generated to where it’s needed in a production process is also maturing. The potential for manufacturers of chemicals, consumer products, food and pharmaceuticals to use this approach is growing as a precursor to the electrification of production systems, said Patricia Provot, president of thermal production equipment manufacturer Armstrong International.

“If your plan is to fully decarbonize, your first step is to get rid of steam and use hot water, and then try to recover as much of that waste heat as possible and put it back into the system,” Provot said.

 

 


 

 

Source   GreenBiz Group Inc

Cost-cutting hot water heat pumps and online solar panel design will be available in UK this summer

Cost-cutting hot water heat pumps and online solar panel design will be available in UK this summer

Cost-cutting green home technologies are set to launch in the UK this summer to make it easier and cheaper for homeowners to slash their energy use and carbon footprint.

Demand for green home technologies is surging as households look to invest in new equipment to cut their energy bills and reduce reliance on grid power.

And that has enticed overseas firms to enter the UK market with new products such as high temperature heat pumps and technology that can automatically design solar energy installations online.

 

Norwegian solar marketplace Otovo plans to launch a UK branch this summer, promising customers savings of up to 10 per cent on the cost of rooftop solar installation.

The online marketplace takes a customer’s address and then automatically calculates the size, shape and specification of suitable rooftop solar products. It then runs an automated, ‘real time’ auction between local solar installers to find the cheapest price for the work.

Co-founder Andreas Thorsheim said customers save time and money by having the survey work and quote calculated remotely. Installers also benefit by not having to “drive around drinking tea with people who end up not buying,” he added.

“In essence we are doing the Googling for you, we’re doing the price comparison for you, we’re doing the quality assurance of these workmen for you, and presenting you with the cheapest available price,” he told i.

 

Otovo was founded in Oslo, Norway in 2016 and now operates across seven European countries. A UK outpost will open in July or August this year, Mr Thorsheim said.

Demand for solar has rocketed in recent months as consumers across the UK and Europe hunt for ways to reduce their reliance on expensive grid electricity. Calculations suggest rooftop solar can shave hundreds of pounds off the average annual electricity bill.

Meanwhile high temperature heat pumps, which pump very hot water around the house in the same way as a gas boiler does, are set to arrive in the UK this month.

Usually air source pumps heat water up to a maximum of 50C. Homes therefore usually need to be well insulated with large radiators or underfloor heating to stay warm.

But high temperature pumps heat water to between 65C and 90C – similar to temperatures achieved using a gas boiler. The idea is that these pumps will act as green replacements for gas boilers in leaky homes that are too draughty for a standard lower temperature heat pump.

 

Viessmann Vitocal 151-A air source heat pump indoor and outdoor units (Photo: Viessmann)

 

This month, heat pump manufacture Viessmann will start selling two high temperature heat pumps in the UK. Both heat radiator water to up to 70C. This means that in most cases they can use existing radiators and do not require under-floor heating, Viessmann said, saving households thousands of pounds in avoided retrofit work.

Meanwhile, rival heat pump manufacturer Vattenfall is also developing a high temperature heat pump, using technology adapted from Japanese hot water systems.

“If you are in two identical houses, and in one is a traditional gas boiler and in the other is our high temperature heat pump, you won’t feel the difference,” said Wouter Wolfswinkel, who is leading the heat pump’s development at Vattenfall.

After successful trials in the Netherlands and Germany, Vattenfall plans to start selling this heat pump in the Netherlands starting this month, and i understands the team is keen to bring it to the UK as soon as possible.

Installation costs are around €14,000 (£11,700), Mr Wolfswinkel told i. This is more expensive than a gas boiler and a traditional heat pump but the new system cuts out the need for expensive insulation work on older properties, he stressed.

 


 

Source iNews