Search for any green Service

Find green products from around the world in one place

Intel is using hot water to cut natural gas use in its factories

Intel is using hot water to cut natural gas use in its factories

Intel’s new manufacturing plant in Leixlip, Ireland, which cost $18.5 billion to build, is replete with technologies touted for conserving energy and water including programmable, all-LED lighting and a water reclamation and filtration system that could save 275 million gallons a year.

One of its more unusual features, however, is an approach that’s often overlooked: capturing heat generated by equipment in the facility and funneling it into production processes rather than expelling it through cooling towers. This was accomplished by the installation of recovery chillers that capture heat created by Intel’s high-temperature manufacturing processes and pipe it in the form of heated water to other places at the facility.

Intel estimates these heat recovery measures will allow it to significantly cut the natural gas it must buy to run operations at the site, Fab 34. It will use nine times as much recovered energy than what is generated by other fuels, the company projects. That so-called “waste heat” can be used for tasks such as preheating the ultra-pure water Intel needs for semiconductor fabrication or keeping buildings at the site warm during cooler weather, said Rich Riley, principal engineer in Intel’s corporate services development group.

“If we didn’t have that heat, we would need that much more gas to facilitate the [heating, ventilation and air-conditioning] operations,” Riley said. “This is an overall reduction of natural gas consumption.”

Over time, Intel’s plan is to build on heat recovery and other energy efficiency measures by updating them with industrial equipment, such as heat pumps, that run on electricity.

Intel’s near-term energy-related sustainability goals include reducing Scope 1 and 2 emissions by 10 percent by 2030 from a 2019 baseline (it has achieved 4 percent as of fiscal year 2022); and conserving up to 4 billion kilowatt-hours cumulatively.

 

An untapped source of energy efficiency

Intel hasn’t disclosed the potential impact on its carbon emissions this heat recovery at Fab 34 effort could have, but a retrofit using water-to-water heat pumps in Fab 10 (also in Leixlip) will save an estimated 18.3 million kilowatt-hours of electricity annually. It will reduce Scope 1 emissions by about 4,760 metric tons, but Scope 2 emissions will increase by about 1,627 metric tons because of the electricity needed for the heat pumps.

Industrial energy remains a thorny challenge for corporate sustainability teams: An estimated 20 percent to 25 percent of energy consumed globally by industrial sources is still predominantly powered by coal and natural gas, according to the International Energy Agency.

The potential energy cost savings of using recovered waste heat for industrial processes, district heating applications or to generate electricity could reach up to $152.5 billion annually, slightly less than half the value of the natural gas imported by the European Union in 2022, according to a McKinsey report published in November. The analysis estimates the global recoverable heat potential is at least 3,100 terawatt-hours.

“In our view, if you want to decarbonize, heat recovery and waste heat is one of the most economical levers available,” said Ken Somers, a McKinsey partner who was one of the report’s authors. One barrier to adoption has been low natural gas prices, but tariffs and supply shortages have prompted companies to rethink their dependence, he said.

The industrial heat pump technology needed to move heat from where it’s generated to where it’s needed in a production process is also maturing. The potential for manufacturers of chemicals, consumer products, food and pharmaceuticals to use this approach is growing as a precursor to the electrification of production systems, said Patricia Provot, president of thermal production equipment manufacturer Armstrong International.

“If your plan is to fully decarbonize, your first step is to get rid of steam and use hot water, and then try to recover as much of that waste heat as possible and put it back into the system,” Provot said.

 

 


 

 

Source   GreenBiz Group Inc

Can You Enjoy a Warmer Winter Without Increasing Your Energy Use?

Can You Enjoy a Warmer Winter Without Increasing Your Energy Use?

Excessive Energy Consumption in Winter

Home heating costs keep soaring yearly, creating a budget concern among American homeowners. In 2022, the National Energy Assistance Directors Association forecasted each home would pay an average of $1,328 for electricity in the winter of 2023 — a 17% increase from the previous year’s power consumption.

Because people need to stay warm and cozy indoors, the heating system operates for nearly 24 hours. While it’s necessary for survival, homeowners are getting more concerned about the rising energy costs and the impact of constantly running appliances on the environment.

So this brings the question, “Is it possible to keep warm and save on bills?” The answer is a big yes — and there are several options to do so. Here are the workarounds to keep your family warm during winter, minus the skyrocketing bills.

 

Maximize Passive Solar Heating

The easiest way to warm your space is to take advantage of the sun. Doing so doesn’t require any complicated upgrades or installations. All you have to do is open your windows during the day to allow warm air inside and improve circulation.

South-facing windows capture the most heat, so don’t block the sun by placing tall plants directly in front of them. In addition, run your ceiling fan counterclockwise direction — it circulates more warm air by pushing it down.

During the night, close the blinds to trap heat indoors. If you can, invest in thermal-lined curtains. They’re made of several layers of fabric and microfiber that provide a wall between your home and the cold outside air.

 

Insulate Various Home Areas

While it’s ideal to boost insulation from the roof to the foundation, such a move requires a considerable financial investment. The average cost of home insulation is between $3,000 and $10,000 for a 2,000-square-foot home.

 

Windows

If you lack the budget, simply insulating your doors and windows is energy-saving and pocket-friendly. Here are some hacks.

1. Put a Plastic Film or Bubble Wrap Over the Window

You can save up to $20 per window every winter by merely putting a film over your window. If you have five windows, you can put a potential extra $100 toward other expenses.

The process to do this is straightforward. Use tape to secure the plastic to the edge of the window frame. Then, fix the film to the window using a hair dryer.

2. Add Caulk and Weatherstripping

It’s easy to add caulk to your windows. Make sure to cut the tip of the tube to the same size as the gap between the wall and the frame. If you have double-hung windows, weatherstrip them with a V seal.

3. Install Cellular or Honeycomb Shades

This solution may be more expensive than the first two, but they can last for years. Installing honeycomb shades can save you as much as 15% of your yearly HVAC energy use. They just take a bit of measuring and drilling.

 

Doors

Weatherstripped doors can also prevent heat loss, warming up your space during winter. Follow these tips to insulate them.

1. Tighten the Screws and Fittings

Check if the doors’ fittings have come loose, which can happen with time. The door must hang appropriately in the frame.

2. Install Weatherproofing Strips and Seals

Self-adhesive strips are the easiest way to seal gaps between the door and the frame. Meanwhile, you can use a weather seal on the bottom of the door.

3. Hang Heavy Curtains on the Entry Doors

At the back of the entry doors, mount a curtain rail on top to hang thick curtains. You can take this down after winter. Remember to do the same for your garage door using rigid foam boards or other similar materials.

 

Use Smart Thermostats

Modern households are becoming technology-driven. By leveraging advancements, you can control energy use. A great example is a thermostat.

Smart thermostats are designed with sensors, algorithms and machine learning capabilities. When sensors detect someone entering the home, the thermostat automatically turns on and adjusts to the occupants’ optimal cooling or heating temperature.

With use, it can remember the best time to heat the home during winter, saving you 8% on heating and cooling bills or $50 per year. They’re also convenient, as you can control them remotely through an app and voice commands in some models.

 

Use Energy-Saving Mode on Appliances

Your choice of entertainment during winter — which may include a TV, game console or computer — can also add up on your bills. Hook them up to a battery saver or turn on low power mode when operating in this setting is possible. For instance, you can turn your laptop into power saver mode if you only do data entry tasks and don’t need the high-resolution video feature. By implementing this simple change, you can save up to $30 a year on energy bills.

 

Switch to LEDs

Lighting accounts for about 15% of your entire home energy use, which is considerable. Swapping to quality LED fixtures will result in huge savings since they use 75% less energy and last more than 20 times longer than incandescent bulbs.

Besides their low energy consumption, LEDs are more durable than traditional lighting. They’re made of epoxy lenses — not glass — increasing their resistance to breakage. More importantly, their longer life span makes them good for the environment, as they emit less carbon.

 

Layer up Indoors

Another simple, sustainable winter practice is to wear warm clothing at home to reduce the need for heating. Wearing thick winter clothes will preserve your body’s natural heat, decreasing your reliance on electricity to warm up. You’ll have to apply the same hack when sleeping — ensure you cover yourself with a layered blanket.

 

Enjoy a Warmer Winter at No Extra Cost

Power bills shoot up during winter due to the extensive use of the heating system. Fortunately, you can enjoy warm, cozy evenings without increasing your energy use by harnessing the sun’s power to heat your home, insulating any openings where heat can leak and switching to a smart thermostat. Save hundreds of dollars yearly using these simple tips to prepare your home for winter.

 

 

 


Source  Happy Eco News

Transparent Solar Panels: a Powerful Alternative to Glass

Transparent Solar Panels: a Powerful Alternative to Glass

In the foreseeable future, transparent solar panels hold the potential to take the place of conventional windows, although several challenges must first be overcome. Transparent solar panels are crafted from materials that permit visible light to pass through while capturing the sun’s energy to generate electricity. This unique feature grants them an aesthetically pleasing advantage over traditional, bulky, and opaque solar panels.

However, the best technologies still have lower efficiency than their traditional counterparts, resulting in lower electricity generation per square meter. Moreover, the cost exceeds that of traditional ones, making them less economically viable for the majority of consumers.

Transparent solar panels are made of a transparent material, such as titanium dioxide or amorphous silicon. These materials allow visible light to pass through while still absorbing some of the energy to generate electricity. This makes transparent solar panels more aesthetically pleasing than traditional solar panels, which can be bulky and opaque.

They are still in the early stages of development, but they have the potential to revolutionize the way we generate electricity. They could be used to power buildings, cars, and other devices without taking up any extra space. For example, transparent solar panels could be used to create solar-powered windows that would allow natural light to enter a building while also generating electricity. They could also be used to create solar-powered car roofs or windows that charge the car’s battery whenever it is exposed to sunlight.

 

They will make economic sense in larger applications despite their lower power-generating capacity. For example, a large high-rise building with good solar exposure could have all the windows facing the sun made with solar panels instead of glass. On a large surface area, this would provide a significant amount of power to run the systems in the building. When combined with high-efficiency LED lighting, regeneration from elevators, and energy storage, the building could become energy neutral or even a net producer.

 

Numerous companies are vigorously working on enhancing the efficiency and affordability of glass solar panel windows. Successful advancements in this direction could potentially position transparent solar panels as a practical alternative to traditional windows in the future.

Here are some companies actively involved in developing transparent solar panels:

  1. SolarWindow Technologies: Pioneering the field, SolarWindow Technologies has created a transparent solar panel utilizing a thin film of titanium dioxide. This material absorbs sunlight and converts it into electricity. The company claims its transparent solar panel boasts 90% transparency and has the capacity to generate up to 10 watts of electricity per square meter.
  2. PolySolar is a company that specializes in the development and manufacturing of transparent solar panels. PolySolar’s transparent solar panels are made of a thin film of cadmium telluride (CdTe), which is a semiconductor material. CdTe is a very efficient material for absorbing sunlight and converting it into electricity. PolySolar’s transparent solar panels are also very transparent, allowing up to 80% of visible light to pass through.
  3. Onyx Solar is a company that specializes in the development and manufacturing of transparent solar panels. Onyx Solar’s transparent solar panels are made of a thin film of amorphous silicon (a-Si), which is a semiconductor material. a-Si is a very transparent material, allowing up to 80% of visible light to pass through.

These companies represent just a glimpse of the ongoing efforts to develop solar panel windows. With continued research and development, it remains promising that glass solar panels will eventually emerge as a compelling option for replacing windows in the future.

 

 


 

 

Source  Happy Eco News

The Air-gen Device that Converts Humidity into Energy

The Air-gen Device that Converts Humidity into Energy

What if it were possible to create energy out of air? A purely sustainable and renewable source of energy that wouldn’t require towers or panels. Researchers from the University of Massachusetts Amherst have developed just that. It turns out that air humidity is a vast, sustainable reservoir of energy that is continuously available. The researchers claim that just about any surface can be turned into a generator by replicating the electrical properties of storm clouds. A storm cloud is a mass of water droplets, all of which contain a charge. When the conditions are right, the cloud can produce a lightning bolt. The researchers have used similar properties to build a small-scale cloud that can produce electricity predictably and continuously.

So how does it work? Their air generator (Air-gen) relies on microscopic holes smaller than 100 nanometres (even more minuscule than a strand of a human hair). The small diameter of these holes is called a “mean free path”, which is the distance a single molecule can travel before it collides with another molecule of the same substance.

Water molecules float all around the air, and their mean free path is around 100 nanometres. As the humid air passes through Air-gen’s minuscule holes, the water molecules will directly contact an upper and lower chamber in the film. Because each pore is so small, the water molecules would easily bump into the pore’s edge as they pass through the thin layer. This interaction creates a charge imbalance and results in electricity.

The researchers claim that their product could offer kilowatts of power for general usage as long as there is any humidity in the air. Their Air-gen device could be more space efficient and blend into the environment compared to other renewable energy options such as solar and wind power. Moreover, humidity exists at all hours of the day and night, rain or shine, to provide non-stop energy.

The researchers also claim that harvesting the air and water droplets could be designed from all kinds of materials, which offers many opportunities for cost-effective and environment-adaptable designs. The Air-gen device is so small that thousands of them could be stacked on top of each other, increasing the amount of energy it gives off without increasing the environmental footprint of the device.

This device stems from the researcher’s previous inventions of generating an electric current using moisture in the air using a microbe called Geobacter. Their device produced a sustained voltage of about 0.5 volts for about 20 hours and could light up small LED bulbs. However, they couldn’t get the microbe to create enough nanowires (the small holes that generate the electric charge) to scale up the technology further.

Their new Air-gen device has never been discovered before, and it opens up many possibilities for effectively using renewable resources to create energy. It’s incredible to think we could harvest energy from the air around us. This discovery and invention could be scaled up. They could make renewable energy more accessible to people around the world. They could reduce the negative environmental impact we see with some existing forms of renewable energy (solar panels or wind turbines).

 

 


 

 

Source Happy Eco News 

Siemens to deliver carbon neutral factory eight years ahead of schedule

Siemens to deliver carbon neutral factory eight years ahead of schedule

Siemens’ Congleton factory manufactures more than 1.2 million controls and drives each year and has been fitted with an array of energy efficiency and low-carbon solutions.

With support from Siemens’ energy and performance services business, Smart Infrastructure, the Congleton factory now generates 75kw of renewable energy through a hydro-electric plant at Havannah Weir on the river Dane. The facility also uses certified carbon-neutral biogas to power onsite engines. A building management system, modern windows and LED lighting have also been fitted to reduce total energy costs by up to 30% respectively.

Siemens believes the facility, which also has EV charging for staff and visitors and is aiming for zero waste to landfill, will become carbon neutral this year. Siemens’ original 2015 commitment was to ensure carbon neutral operations by 2030.

Andrew Peters, Managing Director of Siemens Digital Industries Congleton, said: “Siemens believes that sustainability is a force for good and can deliver value for all its stakeholders. We want to help customers achieve sustainable growth and to transform their industries through decarbonisation. The first step of that is for us to achieve these ambitions in our own operations.

 

Siemens’ original 2015 commitment was to ensure carbon neutral operations by 2030.

 

“I am delighted that by leveraging a culture of continuous improvement and sustainability – the vital components to Siemens’ Congleton’s long-term success – we have achieved carbon neutrality, a major milestone in our ambitions to reach net zero emissions by 2030.”

The company claims that energy efficiency measures have saved around £250,000 annually at time when energy costs are rising quickly.

After setting its carbon neutrality goal in 2015, Siemens began tying executive-level pay to progress against key sustainability targets, including its 2030 GHG goal, at the advice of the board.

It has since joined Amazon’s Climate Pledge and vowed to reach net-zero carbon by 2040.

Amazon’s ‘Climate Pledge’ was launched in September 2019, after the e-commerce giant faced mounting pressure from consumers, investors and its own staff to firm up its environmental ambitions and actions in line with its scale. It worked with non-profit Global Optimism, the brainchild of former UN climate secretary Christiana Figures, to develop the pledge, which is headlined by a 2040 net-zero target, and to open it up to additional businesses.

The company has recently joined the SteelZero initiative. Convened by The Climate Group, which is perhaps best known for its RE100 and EV100 initiatives, SteelZero represents businesses from all parts of the steel value chain. By signing up to SteelZero, companies commit to procuring, specifying, stocking, or producing 100% net-zero steel across all operations by 2050 at the latest.

 


 

Source Edie