Automatic Biogas Flare Closed Type “GST-9A” Series

Specification

Flow rate      : 500/1,00/2,500 Nm3/hr
Inlet Biogas Supply Pressure : 100 - 250 mbar for none blower model
: 0 - 20 mbar for blower model
CH4 concerntration : 40 - 100% Vol
Exhaust Temperature : 550 - 850 ‘C

Key Features

Explosion proof equipments : All instruments in explosive atmosphere under Zone 1&2
Auto drain condensate water : ATEX Level switch combine with ATEX Solenoid valve operate
Double ignition system : Maximize reliability of the unit operation
Double Pilot ame system : Maximize reliability of the unit operation

Double combustion stage : Controlled smooth combustion and increase reliability
Low power consumption : With designed nozzles created natural draught. No fan required.
Motorized air damper : To control combustion temperature.
Fail-Safe valve : Electrical control valve will be automatic shutdown even if loss of main power supply.
Double Flame arrester : IIA EN12874 Flame arrester installed both pilot and main gas line.
PLC + HMI : Siemens PLC with 7” HMI installed inside IP66 Stainless control panel.
Communication : SCADA compatible via 10/100 RJ45 Ethernet communication.
Data logger : Built in data logger.
Protection : Surge. Under voltage & Over voltage protection device installed.
Structure : Stainless steel.

Dimension

 *Refer to Diagram

Optional

Blower : ATEX biogas blower with inverter controlled
Flow Meter : ATEX biogas thermal mass ow meter installed
Gas Analyser Unit : Used for measure gas concerntration. CH4, CO2, O2 & H2S
Methane gas detector : Used for detect biogas under safety protocol.

Warranty & Spare Parts

Standard warranty 1 year.
All necessary spare part will given to client during warranty period.
Warranty extend available.