The AngelStep® range is an acoustic underlay for the treatment of Impact and airborne noise transfer.
AngelStep® construction combines a highly effective support and cushion. It provides maximum performance for minimum thickness combining impact and vibration damping and sound absorber.
The resilient polyester core layer absorbs impact energy and residual airborne noise from above and below, transforming wave vibrations into heat energy. AngelStep 630 greatly reduces airborne sound waves noise above or below the floor - and complies with the Building Code of Australia in respect to separating floors between adjoining dwellings. When AngelStep® is installed, it delivers optimum performance and comfort for both resident and neighbours alike
Compared to products made by others, Acoustica’s AngelStep range of underlays have been shown in independent comparison tests to offer a more effective acoustic treatment, a thinner solution, that is also cost effective.
The product has been independently tested:
to achieve Lnt,w of 37 - better than AAAC rating 6 stars - independently tested by Vipac Engineers & Scientists Ltd May 2016; document 20E-16-0040-455704 under loose lay vinyl in a building over 50 years old
to achieve Lnt,w of 42 - better than AAAC rating 5stars - independently tested by Vipac Engineers & Scientists Ltd June 2016; document 20E-16-0085-455973 under 20mm solid oak on plywood with a 190mm concrete slab, 80mm cavity with no insulation & 10mm plasterboard ceiling
to achieve Lnt,W of 43 - better than AAAC rating 5 stars - independently tested by Vipac Engineers & Scientists Ltd October 2016; document 20E-16-0192-ADM-456564-0 under Novocore vinyl with a 200mm concrete slab with bare concrete ceiling
It is 4mm thin and is supplied in tiles 1200x1200mm(1.44m2)
The unrivalled performance of AngelStep® 630 is due to its unique and patented polymer construction. No degradation of acoustic properties due to structural collapse under the weight of heavy furniture, castors and appliances. For thin vinyl or vinyl that does not interlock or clip together we recommend installation of the vinyl on top of flooring grade plywood on top of the AngelStep product.
AS ISO 9705-2003: classification Group 1 ; (SMORGArc) <100m2/s2; as required by BCA C1.10; tested 16/05/2012 BRANZ FI 4871
ISO 9705 1993: classification Group 1-S; smoke production rate <5.0m2/s as required by NZBC C/VM2; EN13501-1:2007 B-s2, d0 report dated 22/07/2009
VOC emissions tested by Cetec Pty Limited (CV080408) for chemical emission & is classified as low VOC.
VOC Concentration 0.01mg/m3
Standard panels are 1200x1200x4mm easily cut to size
Please fill out the form below to receive additional information on the product/service or a quote. Your request will be sent directly to the company.